Standards

• 8 kHz – 30 MHz Wideband: Delivers ±1 dB antenna-factor accuracy across the full spectrum.
• Dual-Mode Measurement: 20 dB/m (E-field) and –31.5 dB Ω·m (H-field) in one compact probe.
• Long-Life Battery Operation: NiMH pack provides over 12 hours of low-noise, mains-free measurements.
• Overload Protection: Built-in LED indicator alerts you at the 1 dB compression point.

Stacked Logarithmic-Periodic Broadband Antenna for Linear polarised RX- and TX- applications in the microwave frequency range. The antenna structure is made of laser-cut brass. For the protection of the fine antenna structure against damage, the antenna is equipped with a low loss plastic protection cover. The STLP 9149 is especially suitable for Immunity Testing acc. to IEC 61000-4-3 because of its good field uniformity.

• (0.6)0.7-9 (10.5) GHz
• Gain 10.3 dBi +/- 1.5 dBi
• Type N female

• Broadband Amplification – Covers 80 Hz – 3 GHz
• High Gain Options – 20 dB or 40 dB for signal boosting
• Superior EMI Shielding – Operates in fields >500 kV/m
• Battery-Powered – Up to 27-hour autonomy
• Low Noise Performance – Ensures clean signal amplification
• Rugged & Compact – SMA connectors, lightweight design

The optoSENT system was developed for the transmission of asynchronous SENT signals (Single Edge Nibble Transfer) aThis system is used for the optical transmission of PSI5-signals and allows the transmission in both directions with a sampling rate of 50 MS/s. It consists of a transceiver, supplied by batteries, for the connection of a sensor, a simplex-62,5/125µm-multimode optical cable, and a receiver with internal batteries as well.nd exists in two different versions.

• Seamless Impedance Matching – Converts 1 MΩ to 50 Ω for accurate measurements
• Broadband Performance – Covers DC to 650 MHz
• Low-Noise Operation – Shielded design for interference-free signals
• Battery-Powered – 40+ hours autonomy, quick
• Versatile Connectivity – BNC input & SMA output for easy integration

• Automated Oscilloscope Control – Seamless data collection & waveform adjustments
• Advanced Signal Compensation – Real-time correction for accurate measurements
• Multi-Channel Support – Controls multiple oscilloscopes simultaneously
• Time & Frequency Domain Analysis – Deep signal insight for precise testing
• User-Friendly Interface – Intuitive setup, measurement logging & export
• Lifetime License – One-time purchase, no recurring fees

• Ultra-Wideband – Covers up to 10 GHz
• High Accuracy – Superior phase & amplitude balance
• EMI Shielded – Ensures clean signal transmission
• Low Loss – Maintains signal integrity
• Passive Design – No power required, bidirectional flow
• Compact & Durable – SMA connectors for easy integration

The optoSPI-HS system can be used for the bidirectional optical transmission of SPI signals with transmission rates of up to 1Mbit/s. It consists of two battery supplied transceivers connected to each other with an optical fiber. With the optical transmission of the shielded case and the external filter, the system is well equipped for EMI and EME tests.

• Ultra-Fast Response – Time constants from 200 ns to 12 µs for precise signal integration
• High Bandwidth – Supports frequencies up to 1.4 GHz
• Accurate Signal Reconstruction – Eliminates errors from numerical integration
• Passive & Reliable – No power required, ensuring long-term stability
• Oscilloscope-Compatible – Seamless integration with high-impedance inputs
• Versatile Connectivity – Available with N, BNC, and SMA connectors

The broadband horn antenna BBHA 9120 C is a linear polarized double ridged horn antenna.

• 2 GHz to 18 (20) GHz
• SMA - female