Categories

CISPR 22 (EN 55022)

OTHER PRODUCTS IN THE SAME STANDARD:
DGA 9552 N, Attenuator, 5 watts, 18GHz, 3, 6, 10, 20, 30, & 40dB

DGA 9552 N is a bidirectional attenuator, i.e. the attenuation and power capability specification is valid for both directions.

There is a large variety of applications for this attenuator: The measuring range of a spectrum analyzer can be increased. Any kind of meter can be protected against overload; it can be used to control the linearity of a meter reading. It can minimize measurement uncertainty caused by mismatched impedances. During an EMI receiver calibration, an attenuator directly at the pulse generator output is inevitable.

  • 3, 6, 10, 20, 30, and 40 dB Values available
  • 50 Ohm, Low VSWR
  • 5 Watts, 1 kW peak (5 μsec. pulse width, 0.25% duty cycle)
  • Optional storage case CCA

DGA 9553 BNC, Attenuator, 1 watts, 2GHz, 3, 6, 10, 20, and 30 dB

DGA 9553 BNC is a bidirectional attenuator, i.e. the attenuation and power capability specification is valid for both directions.

There is a large variety of applications for this attenuator: The measuring range of a spectrum analyzer can be increased. Any kind of meter can be protected against overload; it can be used to control the linearity of a meter reading. It can minimize measurement uncertainty caused by mismatched impedances. During an EMI receiver calibration, an attenuator directly at the pulse generator output is inevitable.

  • 3, 6, 10, 20, and 30 dB Values available
  • 50 Ohm, Low VSWR
  • 1 Watts

EMC001330SE, 10 kHz - 3 GHz, 30dB gain, Portable Low Noise Preamplifier

  • 10 kHz - 3 GHz, 30dB Gain, 5dB N.F.
  • Compensation long cable loss for EMI Measurement
  • Improve system noise floor flatness
  • High EMI performance
  • High linearity LNA for EMI measurement
  • High dynamic range
  • Unconditionally Stable
  • State-of-the-Art Technology

NTFM 8158, ISN for unshielded Cat 6 lines, Acc CISPR 32

  • Impedance Stabilisation Network (ISN)
  • acc. CISPR 22 Ed.5.5:2006, (CISPR 32)
  • Unshielded twisted pairs (UTP) or communication ports 
  • With 2, 4, 6, or 8 wires

8158 Mag Base, Magnetic Cover for ISN 8158 to attach ISN to steel wall

The magnetic fixture „8158 Magbase“ can be used to fix a NTFM 8158, a CAT5 8158, or a CAT3 8158 to a steel wall vertically.

EMC001340SE , 10 kHz - 3 GHz, 40dB gain, Portable Low Noise Preamplifier

  • 10 kHz - 3 GHz, 40dB Gain, 5dB N.F.
  • Compensation long cable loss for EMI Measurement
  • Improve system noise floor flatness
  • High EMI performance
  • High linearity LNA for EMI measurement
  • High dynamic range
  • Unconditionally Stable
  • State-of-the-Art Technology

Loading...