IPG 255, Insulation Tester, 8kV
IPG 1218 / 1012 / 605, Insulation Test, 12kV, 10kV, 6.25kV
PG 12-400, 12kV, Impulse Wave Generator
IPG 2025 / IPG 2436, Impulse Wave Generator 20kV or 24kV
IPG 1201, Insulation Tester, 12kV
CCK20 Calibration kit for: PG 10-200, PG 12-360 and PG 20-100
PG 6-364: HV Pulse Generator
IPG 809, Capacitor Tester, 8kV
PG 10-150, Flammability test, 10kV
PG 10-200 / PG 12-360, Solar modules test, 10kV & 12kV
PG 20-100 Solar modules test, 20kV
Products
IPG 620/ IPG 1050/ IPG 1272 6kV, 10kV, 12kV
HV - Impulse generators IPG 620, IPG 1050 and IPG 1272 create standard impulse voltages with waveform 1.2 / 50 µs acc. to IEC 60. The generators simulate surges caused by switching of inductive loads, power system switching, lightning strokes, etc. They are designed for testing of impulse dielectric strength of components, insulation, air-and surface flash-over gaps as well as for testing surge immunity of devices and systems acc. to CCITT - K22, ITU-T-K44. Picture: incl. option PA503
IPG 255, Insulation Tester, 8kV
The High-Voltage Pulse Generator IPG 255 is designed for testing of impulse dielectric strength of components, insulation, air-and surface flash-over gaps of watt-hour meters, static relays etc. according to IEC 60255, EN 61036, VDE 0435 part 303. Picture: incl. Option PA 503
IPG 1218 / 1012 / 605, Insulation Test, 12kV, 10kV, 6.25kV
High-Voltage Pulse Generators IPG 1218 / 1012 / 605 generate standard impulse voltages with waveform 1.2 / 50 µs acc. to IEC 60060. They are designed for testing impulse dielectric strength of components, insulations, air- and surface flash-over gaps acc. to IEC. The peak value of the test voltage is continuously adjustable from 0.2 - 6.25 / 10 / 12 kV. Positive or negative polarity of the output voltage can be selected. A built-in voltage divider 1000:1 allows monitoring of the impulse output waveform during testing.
PG 12-400, 12kV, Impulse Wave Generator
High-Voltage Pulse Generator PG 12-400 generates standard impulse voltages with waveform 1.2 / 50 µs acc. to IEC 60060. It is designed for testing impulse dielectric strength of components, insulations, air- and surface flash-over gaps acc. to IEC.
IPG 2025 / IPG 2436, Impulse Wave Generator 20kV or 24kV
The HV - Impulse generators IPG 2025 and IPG 2436 create standard impulse voltages with waveform 1.2 / 50 µs acc. to IEC 60060. They are designed for testing impulse dielectric strength of components, insulations, air- and surface flash-over gaps according to the standards. The peak value of the test voltage is continuously adjustable from 2 - 20 kV or 2 - 24 kV. Positive or negative polarity of output voltage can be selected. A built-in voltage divider 1000:1 allows monitoring of the impulse output waveform during testing.
IPG 1201, Insulation Tester, 12kV
The High-Voltage Pulse Generator IPG 1201 is designed for testing of impulse dielectric strength of components, insulation, air- and surface flashover gaps. It is specially used for testing surge withstand capability of insulation between accessible parts and hazardous live parts, e.g. terminals for connection of antenna and mains supply terminals, refer to EN 60065. Picture: incl. Option PA 503
CCK20 Calibration kit for: PG 10-200, PG 12-360 and PG 20-100
The Capacitor Calibration Kit CCK has been designed to measure the pulse output voltage of surge generators PG10-200, PG12-360 and PG20-100.
PG 6-364: HV Pulse Generator
The high-voltage impulse generator PG 6-364 generates standard impulse voltages with waveforms 1.2/50 µs and 10/700 µs. The Output voltage is adjustable between 0.2 kV and 6 kV. The polarity of the output voltage is selectable. Positive, negative or alternating polarity of the output voltage can be preselected. The generator is designed for dielectric testing of components and systems as well as testing of the electromagnetic compatibility of electronic systems and devices acc. to CCITT K17/K20/K22, ITU-T/K44, IEC 61000-4-5, VDE 0847.
IPG 809, Capacitor Tester, 8kV
The High-Voltage Pulse Generator Type IPG 809 is designed for dielectric testing of X- and Y-capacitors with standard impulse voltages 1.7/46 µs –0/+50% up to 8 kV acc. to IEC 60384-14, EN 132400, VDE 0565 etc. Picture: incl. Option PA 503
PG 10-150, Flammability test, 10kV
The PG 10-150 consists essentially of a variable transformer with motor drive, isolating transformer, filter circuit, DUT with parallel capacitor and a high-voltage pulse generator. All settings in the power section are made on the control unit. The pulse-forming networks according to IEC 60384-14 are adjustable.
PG 10-200 / PG 12-360, Solar modules test, 10kV & 12kV
The HV-Pulse generator PG10-200 / PG12-360 is used for impulse voltage tests of solar modules (photovoltaic panels) with the standard surge voltage waveform 1.2/50 µs according to IEC 60060-1/2 up to 10 kV acc. to. IEC 61730-1/2 / EN 61730-1. For the surge voltage tests of solar modules, these are enveloped with a copper foil as described in the relative above standard. After that the connections of the solar modules are tested with surge voltage against the copper foils. The tight copper foil envelope required by the standard results in comparatively high capacitances of approx. 0 - 183 nF, which is switched in parallel to the output of the impulse generator.
PG 20-100 Solar modules test, 20kV
The HV-Pulse generator PG20-100 is used for impulse voltage tests of solar modules (photovoltaic panels) with the standard surge voltage waveform 1.2/50 µs according to IEC 60060-1/2 up to 20 kV acc. to. IEC 61730-1/2 / EN 61730-1.
