• DGA 9553 BNC, Attenuator, 1 watts, 2GHz, 3, 6, 10, 20, and 30 dB

DGA 9553 BNC, Attenuator, 1 watts, 2GHz, 3, 6, 10, 20, and 30 dB

DGA 9553 BNC is a bidirectional attenuator, i.e. the attenuation and power capability specification is valid for both directions.

There is a large variety of applications for this attenuator: The measuring range of a spectrum analyzer can be increased. Any kind of meter can be protected against overload; it can be used to control the linearity of a meter reading. It can minimize measurement uncertainty caused by mismatched impedances. During an EMI receiver calibration, an attenuator directly at the pulse generator output is inevitable.

  • 3, 6, 10, 20, and 30 dB Values available
  • 50 Ohm, Low VSWR
  • 1 Watts

PARTNER:

MARKETS:

TEST STANDARDS:

Data Sheet

SPECIFICATIONS

DGA 9553 BNC, Attenuator 1 watts, 2GHz, 3, 6, 10, 20, & 30dB

 See the Article on commonly used attenuator sizes

A bidirectional attenuator, i.e., the attenuation and power capability specification, is valid for both directions. There is a large variety of applications for this attenuator: The measuring range of a spectrum analyzer can be increased. Any kind of meter can be protected against overload; it can be used to control the linearity of a meter reading. It can minimize measurement uncertainty caused by mismatched impedances. During an EMI receiver calibration, an attenuator directly at the pulse generator output is inevitable.

 

Every DGA 9553 BNC is delivered with an individual calibration of the attenuation. Calibration data of the VSWR is available on request. Sold individually or as a kit.

 

 

 

Specification DGA 9552 BNC
 Frequency Range: DC ... 2 GHz
 Impedance: 50 Ohm
 Connectors: BNC
 Attenuation: 3, 6, 10, 20, 30, 40 dB
 Length: 50 mm
 Max. Power: 1 W
 VSWR: < 1.2
 Temperature Range: -55 ... 100 °C
 Body: Stainless steel

 

 
OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...