8158 Mag Base, Magnetic Cover for ISN 8158 to attach ISN to steel wall
The magnetic fixture „8158 Magbase“ can be used to fix a NTFM 8158, a CAT5 8158, or a CAT3 8158 to a steel wall vertically.
PARTNER:
MARKETS:
TEST STANDARDS:
Data Sheet
SPECIFICATIONS
8158 Mag Base, Magnetic Cover for ISN 8158 to attach ISN to the steel wallThe magnetic fixture „8158 Magbase“ can be used to fix a NTFM 8158, a CAT5 8158, or a CAT3 8158 to a steel wall vertically. It is capable of holding approximately 2.5 kg whereas the ISN mentioned above weigh not even 500 g.
|
OTHER PRODUCTS IN THE SAME CATEGORY:
NTFM 8158, ISN for unshielded Cat 6 lines, Acc CISPR 32
8158 Mag Base, Magnetic Cover for ISN 8158 to attach ISN to steel wall
CDN ISN S8 RJ45, CDN/ISN for Shielded Telecom lines, Acc IEC 6100-4-6/CISPR 32
ISN S1, ISN for Coax Acc CISPR 32
ISN S8, ISN for Shielded Telecom lines, Acc CISPR 32
CAT3 8158, ISN for unshielded Cat 3 lines, Acc CISPR 32
CAT5 8158, ISN for unshielded Cat 5 lines, Acc CISPR 32
SYMAT 40, Symmetrical Step Attenuator, 100 Ohms acc. EN 50561-1
ISN 50561-1, ISN for PLC measurement, acc. EN 50561-1
NTFM 8131, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32
ISN 50561-3 - Impedance Stabilization Network
PILOT ISN, 150 kHz - 30 MHz, 1.4A, PLC
CS-50, 2 way splitter, 50 Ohms acc. EN 50561-1
SPLIT 100, 2 way splitter, 100 Ohms acc. EN 50561-1
SY 9223-50561-1, Symmetrical Transformer, 50 to 100 Ohms acc. EN 50561-1
CU 50561-1, Coupling Unit , acc. EN 50561-1
AC Separator, acc. EN 50561-1
SY 9223-PLC-AAN, PLC bypass
AN-ABCD-300, 300 Amp Artificial Network, EV HV Testing
