LSPM 2.1 Laser Powered, Triple High-Speed Power Meter, 9 kHz – 26.5 GHz 

• Three-channel (Single and dual-channel versions are available as well)
• high speed
• high accuracy
• high dynamic range RF Power Meter
• Lasser Powered Power Heads, >1000V/m, Fibers >500m

The optoLAN-BCM89811 system can be used for the optical transmission of automotive ethernet signals with Broadcom© BCM89811© and other 100BaseT1 chipsets.  There are two setups available, T1 to T1 (standard) or T1 to Tx (with integrated media converter => optoLAN-BCM89811 -MC), see separate setup document.  The standard connector is Rosenberger HSD (Z-coded). 

The LSProbe 1.2 Variant F Field Probe is a high-speed, high-accuracy, and high-dynamic range electric-Field probe.

• Its standard frequency range of 10 Hz – 8.2 GHz. 1,000 V/m
• Best-in-class compensation of linearity, frequency, and temperature guarantees accurate measurements from less than 0.1 to at least 1,000 V/m.
• A dynamic range of 100 dB is achieved for many frequencies, enabling Field measurements at more than 10,000 V/m.
• Customized high Field-strength „X“-variants, supporting up to 30,000 V/m and a damage level of 100,000 V/m, are available upon request.

The LSProbe 1.2 Variant E Field Probe is a high-speed, high-accuracy, and high-dynamic range electric-Field probe.

• Its standard frequency range of 10 kHz – 8.2 GHz. 15,000 V/m
• Best-in-class compensation of linearity, frequency, and temperature guarantees accurate measurements from less than 15 to at least 15,000 V/m.
• A dynamic range of 100 dB is achieved for many frequencies, enabling Field measurements at more than 10,000 V/m.
• Customized high Field-strength „X“-variants, supporting up to 30,000 V/m and a damage level of 100,000 V/m, are available upon request.

LSFrame is LUMILOOP’s solution for straight-forward and reliable integration of one or more LUMILOOP products in a LAN-controlled, standard 19 inch form factor appliance.

LSFrame can host:

• LSProbe Laser-Powered Electric-Field Probes,
• CI 250+
• LSPM High-Speed Power Meters, and
• LSPM+ High-Speed Power Meters, and
• upcoming LUMILOOP products.

The original EMC EPS 5CM Sheets are white Expanded Polystyrene with 1cm x 1cm indentations for easy measurements. It can be cut down to size with the included razor knife. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for the use in EMC testing for EUT and cable supports. The EMC EPS 5CM SHEETS are crush resistance able to withstand heavy weight loads without deforming. 1cm marking on the top side allows for easy positioning and test setups. Conveniently sold as sheets other sizes possible just ask.