Categories

ISO 11452-4

OTHER PRODUCTS IN THE SAME STANDARD:
NNBM 8124-800, 0.1 - 150 MHz, High Voltage, 800A, single path, Automotive LISN

  • Acc. to CISPR 25 Ed. 4, CISPR 16-1-2, or ISO 7637-2
  • impedance (5µH + 1 Ohm) || 50 Ohm
  • 800 A, 1000 V (DC)
  • Switchable 50Ohm Load on measurement port
  • 1 microfarad capacitor to ground on AE side
  • BNC-jack (Type N option)

NNBM 8124-400, 0.1 - 150 MHz, High Voltage, 400A, single path, Automotive LISN

  • Acc. to CISPR 25 Ed. 4, CISPR 16-1-2, or ISO 7637-2
  • impedance (5µH + 1 Ohm) || 50 Ohm
  • 250 A, 1000 V (DC)
  • Switchable 50Ohm Load on measurement port
  • 1 microfarad capacitor to ground on AE side
  • BNC-jack (Type N option)

NNBM 8124-200, 0.1 - 150 MHz, High Voltage, 200A, single path, Automotive LISN

  • Acc. to CISPR 25 Ed. 4, CISPR 16-1-2, or ISO 7637-2
  • impedance (5µH + 1 Ohm) || 50 Ohm
  • 200 A, 1000 V (DC)
  • Switchable 50Ohm Load on measurement port
  • 1 microfarad capacitor to ground on AE side
  • BNC-jack (Type N option)

EMC EPS Bar- 1m long 5cm height, EUT/cable support

The original EMC EPS Bar is white Expanded Polystyrene can optional be painted coating to extend durability. They come in dimensional metric sizes of 100 x 8.5 x 5 cm. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. The EMC EPS Bar is crush resistance and able to withstand heavy weight loads without deforming. 1cm marking on 4 sides allows for easy positioning and test setups.

EMC EPS 70cm Support- EUT support

The original EMC EPS 70cm Support is white Expanded Polystyrene. They come in dimensional metric sizes of 40 x 60 x 70 cm. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. Since the EMC EPS 70cm Support is made from a denser EPS rating, it is crush resistance and able to withstand heavy weight loads without deforming. 

EMC EPS Cube- 10x10x10 cm, EUT support

The original EMC EPS Cube is white Expanded Polystyrene can optional a painted coating to extend durability. They come in dimensional metric sizes of 10 x 10 x 10 cm which matches EUT height requirements for IEC testing above the ground plane for IEC 61000-4-5 and IEC 61000-4-6. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. The EMC EPS Cube is crush resistance and able to withstand heavy weight loads without deforming. 1cm marking on all 6 sides allows for easy positioning and test setups. They are conveniently sold in kits in tote bins for secure storage.

Loading...