Categories
-
Automotive +
- BMW GS 95002-3
- CISPR 12
- CISPR 25 (EN 55025)
- FMC1278
- FMC1280
- GM W 3097
- IEC 61851-21-1
- IEC 61851-23
- ISO 11452-2
- ISO 11452-3
- ISO 11452-4
- ISO 11452-5
- ISO 11452-8
- ISO 11452-9
- ISO 16750-2
- ISO 21498
- ISO 7637-2
- ISO 7637-3
- ISO 7637-4
- LV 123
- LV 124
- LV 148
- MBN 11123
- PSA B21 7112
- SAE J 1113/2
- SAE J1752/3
- UN ECE R10
- VW 80300
- VW 80303
-
Component +
-
International Product Standards +
- CISPR 14-1 (EN 55014-1)
- CISPR 14-2 (EN 55014-2)
- CISPR 15 (EN 55015)
- CISPR 22 (EN 55022)
- CISPR 24 (EN 55024)
- CISPR 25 (EN 55025)
- CISPR 32 (EN 55032)
- CISPR 35 (EN 55035)
- EN 55103
- IEC 60060-2
- IEC 60065
- IEC 61643-11
- IEC/EN 50561-1
- IEC/EN 50561-3
- IEC/EN 61000-4-20
- IEC/EN 61000-6-1
- IEC/EN 61000-6-2
- IEC/EN 61543
- ISO 14708-3
-
International Test Standards +
- ANSI C63.16 ESD
- ANSI C63.4
- ANSI C63.5
- ANSI/IEEE C62.41
- CISPR 16-1-1
- CISPR 16-1-2
- CISPR 16-1-4
- CISPR 17
- CISPR 22 (EN 55022)
- CISPR 32 (EN 55032)
- IEC 60
- IEC/EN 61000-3-11
- IEC/EN 61000-3-12
- IEC/EN 61000-3-2
- IEC/EN 61000-3-3
- IEC/EN 61000-4-10
- IEC/EN 61000-4-11
- IEC/EN 61000-4-12
- IEC/EN 61000-4-16
- IEC/EN 61000-4-18
- IEC/EN 61000-4-19
- IEC/EN 61000-4-2
- IEC/EN 61000-4-29
- IEC/EN 61000-4-3
- IEC/EN 61000-4-34
- IEC/EN 61000-4-39
- IEC/EN 61000-4-4
- IEC/EN 61000-4-5
- IEC/EN 61000-4-6
- IEC/EN 61000-4-8
- IEC/EN 61000-4-9
- IEEE 1309
-
Military & Avionics +
-
Safety +
-
Telecom/Wireless +
ISO 11452-5
ISO 11452-5:2002
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline
This part of ISO 11452 specifies stripline tests for determining the immunity of electronic components for passenger cars and commercial vehicles to electrical distrubances from narrowband electromagnetic energy, regardless of the vehicle propulsion system (e.g. spark-ignition engine, diesel engine, electric motor). As the performance of these tests depends on the exposure of the equipment harness to a disturbance field, the applicability of this part of ISO 11452 is limited to equipment harnesses, which have a maximum diameter of one-third the stripline height or less.
The electromagnetic disturbances considered are limited to continuous narrowband electromagnetic fields.
OTHER PRODUCTS IN THE SAME STANDARD:
- Open, unsymmetrical 90 Ohm stripline
- DC - 220 (1000) MHz
- For immunity testing
- ISO 11452-5
- BAN broadband artificial network
- acc. ISO 11452-7 or DC-10614
- BAN 8508, 2 A - 8 A
- BAN 8530, 8 A - 30 A
- DC-Block 500, DC-blocking capacitor
