Langer Z23-2 Set | 900 x 500 x 650 mm EMC Shielding Tent

900 x 500 x 650 mm | 250 mm taller than Z23-1 | 45-50 dB from 30 MHz to 1 GHz | 13 kg

Choose the Z23-2 Set for taller DUTs and measuring instruments. It retains the 900 x 500 mm footprint of Z23-1 while increasing enclosure height to 650 mm. Specified shielding attenuation is 45-50 dB from 30 MHz to 1 GHz. The set includes GP 23, the taller BZ 23-2 cover, ZG 23-1 frame and ZGA 23-2 frame adapters, with front access and a folding structure.

Select Options/Sizes:

Z23-2 set - Datasheet

SPECIFICATIONS

Z23-2 Set | 900 x 500 x 650 mm EMC Shielding Tent

Choose the Z23-2 Set for taller DUTs and measuring instruments. It retains the 900 x 500 mm footprint of Z23-1 while increasing enclosure height to 650 mm. Specified shielding attenuation is 45-50 dB from 30 MHz to 1 GHz. The set includes GP 23, the taller BZ 23-2 cover, ZG 23-1 frame and ZGA 23-2 frame adapters, with front access and a folding structure.

Provide more height for DUTs and measuring equipment

Benefit / taskHow to use the set
Fit taller assemblies The 650 mm enclosure is 250 mm taller than Z23-1, with the same nominal 900 x 500 mm footprint.
Reduce external signals Place the arrangement inside the conductive cover to reduce unwanted RF coupling during development measurements.
Reach the DUT Use front access and the folding frame to make changes without dismantling the entire bench arrangement.
Use the correct frame adapters The ZGA 23-2 adapters extend the ZG 23-1 frame for the taller BZ 23-2 cover and are supplied in this set.

Check clearance for the DUT, cables and fixtures in addition to nominal dimensions. Shielding attenuation is specified as 45-50 dB over 30 MHz to 1 GHz. Instruments and DUTs in application photographs are examples, not included measurement equipment.

Technical specifications

ParameterSpecification
Attenuated shielding 45 dB - 50 dB / 30 MHz - 1 GHz
Weight 13 kg
Sizes (L x W x H) (900 x 500 x 650) mm
GP 23 working surface 900 x 500 mm
GP 23 current rating 10 A
GP 23 dielectric strength 50 V
GP 23 weight 9.25 kg
Shielding cover weight 1 kg
ZG 23-1 frame weight 2 kg

Dimensions are the manufacturer's nominal L x W x H values. Component weights are listed separately from the complete-set weight.

Included components

PhotoQty.ItemFunction / key specifications
GP 23, Ground Plate 1x GP 23 Ground Plate
Current: 10 A
Dielectric strength: 50 V
Working surface (length x width): (900 x 500) mm
Weight: 9,25 kg
BZ 23-2, Shielding Material 1x BZ 23-2 Shielding Material
Attenuated shielding: 45 dB - 50 dB / 30 MHz - 1 GHz
Weight: 1 kg
Sizes (L x W x H): (900 x 500 x 650) mm
ZG 23-1, Tent Poles 1x ZG 23-1 Tent Poles
Weight: 2 kg
ZGA 23-2, Tent Poles Adapter 1x ZGA 23-2 Tent Poles Adapter
Frame extension adapters for the taller Z23-2 enclosure.

Z23-1 versus Z23-2

FeatureZ23-1 SetZ23-2 Set
Nominal dimensions 900 x 500 x 400 mm 900 x 500 x 650 mm
Set weight 12 kg 13 kg
Cover BZ 23-1 BZ 23-2
Frame ZG 23-1 ZG 23-1 + ZGA 23-2 adapters
Published shielding attenuation 45-50 dB / 30 MHz to 1 GHz 45-50 dB / 30 MHz to 1 GHz

Measurement setup and response charts

IllustrationWhat it shows
Shielding attenuation Manufacturer shielding attenuation curve

Datasheets

DocumentOpen PDF
Z23-2 set - datasheet View PDF

Related measurement tools

PhotoProductKey specifications
ESA1 set, Emission Development System ESA1 set 11 near-field probes | 100 kHz to 1 GHz line-current measurements | 20 dB preamplifier | Shielding tent + software
HFW 21 set, RF Current Transformer 100 kHz up to 1 GHz HFW 21 set 100 kHz to 1 GHz | 10 A current rating | 50 V dielectric strength | Common-mode / differential-mode

Practical questions

QuestionAnswer
What changes compared with Z23-1? The taller BZ 23-2 cover and ZGA 23-2 adapters provide 650 mm nominal height. The set is 13 kg and uses the same GP 23 plate and ZG 23-1 frame.
Is shielding attenuation higher than Z23-1? Both are specified at 45-50 dB from 30 MHz to 1 GHz. Extra height does not imply a higher attenuation rating.

Product videos

Selection guide - compare development-stage measurement sets

These sets perform different jobs. ESA1 combines several tools, while the other sets target a particular measurement task. Click a set to review its complete contents.

KitSetTypeKey range / sizeIncluded toolsChoose it for
ESA1 set, Emission Development System ESA1 set Integrated PCB emissions toolkit 11 probes: 30 MHz to 3 GHz; RF-E 02 to 1.5 GHz; HFW 21: 100 kHz to 1 GHz Tent, transformer, bypass, preamplifier, probes and software Coordinated source finding and design comparisons
HFW 21 set, RF Current Transformer 100 kHz up to 1 GHz HFW 21 set RF current transformer 100 kHz to 1 GHz; 10 A HFW 21, HFA 21, cable, accessories and case Separate common-mode and differential-mode RF currents
Z23-1 set, Shielding Tent (900 x 500 x 400) mm Z23-1 set EMC shielding tent 900 x 500 x 400 mm; 12 kg Ground plate, cover and folding frame 45-50 dB attenuation at 30 MHz to 1 GHz
Z23-2 set, Shielding Tent (900 x 500 x 650) mm Z23-2 set Taller EMC shielding tent 900 x 500 x 650 mm; 13 kg Ground plate, taller cover, frame and adapters 250 mm more height than Z23-1
NNB 21 set, Line Impedance Stabilisation Network NNB 21 set Two-channel LISN 100 kHz to 1 GHz; 10 A; 10 dB internal attenuation NNB 21, one cable, accessories and case Conducted disturbance measurements on DUT wiring
OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...