Langer RF Basic Set | 30 MHz to 3 GHz Near-Field Probes

30 MHz to 3 GHz | 6 passive E-field and H-field probes | SMB output

Survey electric and magnetic emissions with larger heads, then use the fine tips to trace the source to a conductor, component or pin. The RF-E 02 covers 30 MHz to 1.5 GHz.

PARTNER:

LANGER EMV-TECHNIK | PCB AND IC EMC TEST EQUIPMENT

MARKETS:

CATEGORIES:

TEST STANDARDS:

Select Options/Sizes:

Langer RF Basic Set Datasheet

Langer RF-R 400-1 Datasheet

Langer RF-R 3-2 Datasheet

Langer RF-B 3-2 Datasheet

Langer RF-U 2.5-2 Datasheet

Langer RF-E 02 Datasheet

Langer RF-E 05 Datasheet

SPECIFICATIONS

RF Basic near-field probe set

Survey electric and magnetic emissions with larger heads, then use the fine tips to trace the source to a conductor, component or pin. The RF-E 02 covers 30 MHz to 1.5 GHz.

Technical specifications

Parameter	Specification
Set frequency coverage	30 MHz to 3 GHz
Probe configuration	6 passive E-field and H-field probes
Probe output	SMB
Published set weight	400 g
Published dimensions	24 x 19.5 x 6 cm

Included components

Photo	Model / Item	Qty.	Frequency range	Function
	RF-R 400-1	1	30 MHz to 3 GHz	Large H-field survey loop
	RF-R 3-2	1	30 MHz to 3 GHz	Fine H-field measurements at ICs and traces
	RF-B 3-2	1	30 MHz to 3 GHz	Angled H-field head for access between components
	RF-U 2.5-2	1	30 MHz to 3 GHz	Narrow-gap H-field probe for conductors and pins
	RF-E 02	1	30 MHz to 1.5 GHz	Large-area E-field survey probe
	RF-E 05	1	30 MHz to 3 GHz	Fine E-field probe for clock lines and pins
Kit view	SMB-BNC 1 m	1		Included accessory
Kit view	Case 5	1		Included accessory

Measurement setup

Connect to a suitable spectrum analyzer or oscilloscope with a 50 ohm input. Keep probe orientation, distance and instrument settings consistent when comparing design revisions. Near-field readings help locate sources and coupling paths during EMC development.

Near-field probe techniques from Langer

Langer demonstrates probe tip shapes, correction curves and time-domain measurements. The tutorial covers general probe technique.

Watch the Langer near-field probe tutorial on YouTube

Near-field probe kit selection guide

Kit	Probes included	Frequency coverage	Choose it for
Y.I.C. NFP Kit	5	10 MHz to 14 GHz	Handheld EMI mapping with five E-field and H-field probes, camera tracking and EMViewer. Uses a compatible external spectrum analyzer.
LF1 set	4	100 kHz to 50 MHz	Lower-frequency magnetic fields near power circuits
RF Basic set (this set)	6	30 MHz to 3 GHz	General PCB survey and fine electric and magnetic troubleshooting
RF1 set	4	30 MHz to 3 GHz	Close-range electric and magnetic troubleshooting
RF2 set	4	30 MHz to 3 GHz	Magnetic survey and source tracing with four heads
RF3 mini set	2	30 MHz to 3 GHz	Sub-millimeter magnetic source localization
RF4-E set	2	30 MHz to 3 GHz	Electric-field coupling and switching-node investigations
XF1 set	5	30 MHz to 6 GHz	Electric and magnetic PCB diagnostics through 6 GHz
SX1 set	3	1 GHz to 10 GHz	Electric and magnetic diagnostics from 1 to 10 GHz
SX-R 20-1 set	1	1 GHz to 20 GHz	Single magnetic probe for measurements through 20 GHz
HR1 set	2	Up to 40 GHz	Combined electric and magnetic coverage through 40 GHz
HR-E 40-1 set	1	Up to 40 GHz	Single electric-field probe for measurements up to 40 GHz (0.2 mm)
HR-R 8-1 set	1	Up to 40 GHz	Single magnetic-field probe for measurements up to 40 GHz
MFA 01 set	3	1 MHz to 6 GHz	Handheld active magnetic microprobes (200 μm)
MFA 02 set	2	1 MHz to 1 GHz	Handheld active magnetic microprobes (200 μm)