Langer HR1 Set | Up to 40 GHz Near-Field Probes

Up to 40 GHz | 1 B-field probe and 1 E-field probe | 2.92 mm (K) female output

Compare electric and magnetic near fields on microwave and millimeter-wave assemblies. The kit includes a 40 GHz microwave cable and probe characterization files for use with the supplied ChipScan-ESA Viewer.

PARTNER:

LANGER EMV-TECHNIK | PCB AND IC EMC TEST EQUIPMENT

MARKETS:

CATEGORIES:

TEST STANDARDS:

Select Options/Sizes:

Langer HR1 Set Datasheet

Langer HR-R 8-1 Datasheet

Langer HR-E 40-1 Datasheet

SPECIFICATIONS

HR1 near-field probe set

Technical specifications

Parameter	Specification
Set frequency coverage	Up to 40 GHz
Probe configuration	1 B-field probe and 1 E-field probe
Probe output	2.92 mm (K) female

Included components

Photo	Model / item	Qty.	Frequency range	Function
	HR-R 8-1	1	Up to 40 GHz	Magnetic near-field probe
	HR-E 40-1	1	Up to 40 GHz	Electric near-field probe
Kit view	HR SF550S - Microwave cable up to 40 GHz	1		Included accessory
Kit view	CS-ESA Viewer - ChipScan-ESA Viewer software on USB	1		Included accessory
-	HR-E char - HR-E 40-1 characteristic	1		Included accessory
-	HR-R char - HR-R 8-1 characteristic	1		Included accessory
-	HR1 set qg - Quick guide	1		Included accessory
-	HR-R 8-1 m - User manual	1		Included accessory
-	HR-E 40-1 m - User manual	1		Included accessory
Kit view	A5 case - System case	1		Included accessory

Measurement setup

Use an analyzer and interconnects rated for the frequency being investigated. Keep probe orientation, distance and instrument settings consistent when comparing design revisions. Near-field readings help locate sources and coupling paths during EMC development.

Near-field probe techniques from Langer

Langer demonstrates probe tip shapes, correction curves and time-domain measurements. The tutorial covers general probe technique.

Watch the Langer near-field probe tutorial on YouTube

Near-field probe kit selection guide

Kit	Probes included	Frequency coverage	Choose it for
Y.I.C. NFP Kit	5	10 MHz to 14 GHz	Handheld EMI mapping with five E-field and H-field probes, camera tracking and EMViewer. Uses a compatible external spectrum analyzer.
LF1 set	4	100 kHz to 50 MHz	Lower-frequency magnetic fields near power circuits
RF Basic set	6	30 MHz to 3 GHz	General PCB survey and fine electric and magnetic troubleshooting
RF1 set	4	30 MHz to 3 GHz	Close-range electric and magnetic troubleshooting
RF2 set	4	30 MHz to 3 GHz	Magnetic survey and source tracing with four heads
RF3 mini set	2	30 MHz to 3 GHz	Sub-millimeter magnetic source localization
RF4-E set	2	30 MHz to 3 GHz	Electric-field coupling and switching-node investigations
XF1 set	5	30 MHz to 6 GHz	Electric and magnetic PCB diagnostics through 6 GHz
SX1 set	3	1 GHz to 10 GHz	Electric and magnetic diagnostics from 1 to 10 GHz
SX-R 20-1 set	1	1 GHz to 20 GHz	Single magnetic probe for measurements through 20 GHz
HR1 set (this set)	2	Up to 40 GHz	Combined electric and magnetic coverage through 40 GHz
HR-E 40-1 set	1	Up to 40 GHz	Single electric-field probe for measurements up to 40 GHz (0.2 mm)
HR-R 8-1 set	1	Up to 40 GHz	Single magnetic-field probe for measurements up to 40 GHz
MFA 01 set	3	1 MHz to 6 GHz	Handheld active magnetic microprobes (200 μm)
MFA 02 set	2	1 MHz to 1 GHz	Handheld active magnetic microprobes (200 μm)