



9 field sources: 4 H + 5 E | High-voltage SMB connections | SHV or Fischer cable choice | External generator required
H3 provides a wider selection of localized E- and H-field sources for investigating immunity failures. Guide a suitable source over the DUT while monitoring its response to pulses from an external EFT/burst generator. Compared with H2, H3 adds BS 05DU-h, ES 01-h and ES 08D-h. A high-voltage cable, case and manual complete the set.
MARKETS:
CATEGORIES:
TEST STANDARDS:
Select Options/Sizes:
H3 provides a wider selection of localized E- and H-field sources for investigating immunity failures. Guide a suitable source over the DUT while monitoring its response to pulses from an external EFT/burst generator. Compared with H2, H3 adds BS 05DU-h, ES 01-h and ES 08D-h. A high-voltage cable, case and manual complete the set.
| Feature | Engineering benefit / use |
|---|---|
| Nine sources | H3 includes all six H2 source types plus BS 05DU-h, ES 01-h and ES 08D-h. |
| Locate the coupling path | Select a source geometry appropriate to the component, conductor or IC region, then move it close to the DUT while watching for the known failure. |
| Generator interface | Choose the SHV-SMB or Fischer-SMB high-voltage cable that matches the generator. Follow the voltage limit of the selected source. |
| Parameter | Specification |
|---|---|
| Field source count | 9 (4 H / 5 E) |
| Pulse source | External EFT/burst generator required |
| Source interface | High-voltage-resistant SMB |
| Generator-side cable choice | SHV or Fischer S103A023; confirm before ordering |
| Component | Parameter | Specification |
|---|---|---|
| BS 02-h | Probe head dimensions | > 5 cm |
| BS 02-h | Weight | 18 g |
| BS 04DB-h | Probe head dimensions | 1 mm - 3 mm |
| BS 05DB-h | Probe head dimensions | 1 mm - 3 mm |
| HV SHV-SMB 1 m | Max. Burst-voltage | 4,4 kV |
| HV SHV-SMB 1 m | Sizes (L x W x H) | 1,20 m |
| Image | What it shows |
|---|---|
![]() |
Application with magnetic field source BS 04DB-h |
![]() |
Application with E-field source ES 01-h |
![]() |
Scope of delivery H3 set |
External EFT/burst generator; observe each source rating. The pulse generator and DUT are not included. Match the cable to the generator and observe the lowest voltage rating of every connected component.
Choose HV SHV-SMB 1 m or HV FI-SMB 1 m as the connection cable. You may order both when you need SHV and Fischer connections. Both cables are not automatically included; confirm the selected configuration and price in the quotation.
| Document | |
|---|---|
| H3 set - Datasheet | View PDF |
| Question | Answer |
|---|---|
| What is this product best suited to? | Choose more source shapes for different PCB structures and coupling paths. |
| What supporting equipment is needed? | External EFT/burst generator; observe each source rating. The pulse generator and DUT are not included. Match the cable to the generator and observe the lowest voltage rating of every connected component. |
| Does this establish compliance with IEC 61000-4-4 or IEC 61000-4-2? | These are development and diagnostic tools. Relating a local disturbance to an EFT/burst or ESD failure helps troubleshooting; formal compliance requires the applicable standardized generator, coupling method, test setup and procedure. |
Compare generation, coupling and detection tools. The kit pictures identify the complete sets. Product links below use the planned Absolute EMC product pages.
| Kit | Product / function | Key distinction | Required pulse source / power |
|---|---|---|---|
![]() |
E1 set Integrated generation and local E/H-field troubleshooting |
Approx. 0-1500 V pulses | 2 ns rise / 10 ns tail | 4 H-field + 5 E-field sources | 10 Mbps optical sensor | SGZ 21 included; 12 V / 200 mA |
![]() |
E2 set Programmable pulse generation and differential injection |
Up to 2.2 kV adjustable | 1.5 ns rise | Adjustable 1.5 kHz repetition | Both polarities | 50 Mbps optical sensor | TS 23 included; 24 V / 1 A DC |
![]() |
S2 set Transient magnetic-field sensing |
Active + passive H-field probes | 3 MSA 02 heads | Optical signal transfer | MSA 02: 1 AAA battery | SGZ 21 receiver documented; confirm E2 receiver arrangement |
![]() |
P1 set Battery-powered E/H-field injection |
3 generators: P11 + P12 + P21 | Approx. 1 mT H-field / 100 kV/m E-field | Single pulse or 5 kHz | 1.5 V AAA | 1.5 V AAA supply; single pulse / 5 kHz |
![]() |
P23 set Fine-tip capacitive pulse injection |
1.2 kV generator voltage | 10 pF coupling | 1.8-10 ns rise | Single pulse or 5 kHz | 1.5 V AAA | 1.5 V AAA supply; single pulse / 5 kHz |
![]() |
P11t set TTL-synchronized magnetic pulse injection |
Approx. 1 mT | 5 V TTL SMB trigger | Single pulse to 10 kHz | 3 us trigger delay | 6.5-15 V supply | 6.5-15 V supply; power supply included |
![]() |
P12t set TTL-synchronized clamp-style magnetic coupling |
Approx. 1 mT | Coupling-clamp tip | 5 V TTL SMB trigger | Single pulse to 10 kHz | 3 us delay | 6.5-15 V supply; power supply included |
![]() |
H2 set External-generator E/H-field coupling |
6 field sources: 3 H + 3 E | Up to 4.4 kV source supply | External EFT/burst generator required | External EFT/burst generator; source limit 4.4 kV |
![]() |
H3 set Extended external-generator E/H-field coupling |
9 field sources: 4 H + 5 E | High-voltage SMB connections | SHV or Fischer cable choice | External generator required | External EFT/burst generator; observe each source rating |
![]() |
PT4 set Potential-free pulse injection plus E/H-field coupling |
4.5 kV maximum burst input | 1:1 transformer | 500 V output dielectric strength | H- and E-field sources | External EFT/burst generator; transformer maximum 4.5 kV |
![]() |
H4-IC set Small-area magnetic field coupling |
Up to 200 mT | 2.54 mm2 resolution | 1.8 mm diameter head | 0-66 MHz | 4 kV maximum burst | External EFT/burst generator; 4 kV maximum burst input |
![]() |
H5-IC set Magnetic field coupling with BS 06DU-s |
Up to 150 mT | 5 x 6 mm head | 0-560 MHz | 4 kV maximum burst | 15 g source | External EFT/burst generator; 4 kV maximum burst input |
![]() |
BD 11 Cable-transient detection and event indication |
Adjustable sensitivity | LED + relay + optical outputs | 20 m maximum fiber | 2 AAA batteries | 88 x 85 x 32 mm | Two 1.5 V AAA batteries |