Langer CAN 100 Set | Optical CAN Bus Transmission

CAN | Bidirectional optical transmission | 5 V supply

CAN 100 Set supports isolated bus connections for EMC testing. 10 m maximum; 6 m at 1 Mbit/s fiber limit. Includes Double 10 m optical fiber. See the specifications for the individual module supply and operating conditions.

CAN 100 - Absolute EMC Datasheet

SPECIFICATIONS

CAN 100 Set | Optical CAN Bus Transmission

Insert a bidirectional optical link into a high-speed CAN connection using two compact CAN 100 probes. The CAN modules support up to 1 Mbit/s. Adjustable edge steepness and a switchable 120 ohm termination support integration into the bus connection.

Choose a configuration

KitVersionSignal bandwidth / rateIncluded fiber
CAN 100 set CAN 100 set Up to 1 Mbit/s Double 10 m

CAN 100 set specifications

Parameter / componentSpecification
CAN 100 Optical Fibre Probe Component specifications below
Transmission range 0 ... 1 Mbit/s
Optical fibre connector 2 x Ø 2.2 mm
CAN transceiver SN65HVD251
Supply voltage 5 V
Current input max. 80 mA
Optical fibre length max. 10 m (max. 6 m at 1 Mbit/s)

CAN 100 set included components

PhotoIncluded itemQty.
CAN 100, Optical Fiber Probe cropped from scope of delivery CAN 100, Optical Fiber Probe 2x
LWL double 10 m, Optical Fiber, Double 10 m cropped from scope of delivery LWL double 10 m, Optical Fiber, Double 10 m 1x
Included connection socketsWire spool shown in the accessory pack CAN 100 acc, Accessories 1x
System case shown with the complete kit A5 case, System case 1x
  CAN 100 m, CAN 100 Set User Manual 1x

CAN 100 set application and kit pictures

Application with CAN 100 and SGZ
Application with CAN 100 and SGZ
Application with CAN 100 detail
Application with CAN 100 detail
Scope of delivery Set CAN 100
Scope of delivery Set CAN 100

Connect the optical measurement path

Connect the sensor at the DUT, route the optical fiber to the receiver, and connect the receiver to the measuring instrument. Provide the specified supply separately at each end. Keep the installed fiber length within the model-specific limit. Choose the sensor voltage range and channel count before configuring the test.

Optical signal transmission for EMC testing

Datasheets

Compare all Langer optical signal transmission sets

KitModelSignalChannels / directionBandwidth / data rateSampling / functionSupported fiber lengthIncluded fiber
A100-1 set A100-1 set Analog 1 DC to 25 kHz 125 ksps / 12 bit 1 to 20 m 1.5 m
A100-2 set A100-2 set Analog 2 DC to 25 kHz 125 ksps / 12 bit 1 to 20 m 2 x 6 m
A200-1 set A200-1 set Analog 1 DC to 500 kHz 3 Msps / 12 bit 1 to 20 m 1.5 m
A200-2 set A200-2 set Analog 2 DC to 500 kHz 3 Msps / 12 bit 1 to 20 m 2 x 6 m
A300-1 set A300-1 set Analog 1 DC to 5 MHz 12.5 Msps / 10 bit 1 to 20 m 1.5 m
A300-2 set A300-2 set Analog 2 DC to 5 MHz 12.5 Msps / 10 bit 1 to 20 m 2 x 6 m
OSE 150-1 set OSE 150-1 set Digital 1 DC to 50 Mbps Logic transmission 1 to 20 m 1.5 m
OSE 150-2 set OSE 150-2 set Digital 2 DC to 50 Mbps Logic transmission 1 to 20 m 2 x 6 m
OSE 450 set OSE 450 set Digital 4 DC to 50 Mbps Logic transmission See receiver / sensor configuration 4 x 6 m
CAN 100 set CAN 100 set CAN Bidirectional Up to 1 Mbit/s High-speed CAN 10 m maximum; 6 m at 1 Mbit/s Double 10 m
LIN 100 set LIN 100 set LIN Bidirectional LIN bus Master / slave Up to 20 m Double 10 m
OB 100 set OB 100 set CAN / LIN Bidirectional CAN / LIN selectable 2 Opto-Boxes 20 m; 6 m at 1 Mbit/s CAN Double 10 m
OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...