AC Separator, acc. EN 50561-1
- The AC separators provide connectivity between the LISNs and the device under test (DuT) respectively the auxiliary equipment (AE) as well as the connection to the measurement setup.
- Two of the R/C elements required by the standard EN 50561-1
- Built-in (1 M || 100 nF).
- Two identical AC separators are required
PARTNER:
MARKETS:
TEST STANDARDS:
Overview PLC Measurement-System EN 50561-1
Data Sheet
SPECIFICATIONS
CU 50561-1, Coupling Unit, acc. EN 50561-1Description The AC separators provide connectivity between the LISNs and the device under test (DuT) respectively the auxiliary equipment (AE) as well as the connection to the measurement setup. Two of the R/C elements required by the standard EN 50561-1 are already built-in (1 M || 100 nF). The 50 μH chokes described in the standard are part of the LISN and thus not integrated in the AC-Separator. Two identical AC separators are required for the measurement setup.
According to the standard one LISN has to be connected to EuT and AE each. These AMN block the high frequent disturbance voltages from mains and provide energy to the EuT as well as to the auxiliary equipment (AE). The AC separators couple the high frequencies through R/C elements and short connection wires into the measurement setup according to the standard EN 50561-1. The AC separators have to be connected to the LISNs. They then provide the energy to the EuT and AE. The measurement circuit is a variable bypass element for the high-frequency range used by PLC modems. The red and the black safety laboratory connectors of the AC separators at the EuT side have to be connected to the SPLIT 100 using the short cables included in the scope of delivery. The AC separator at the AE side has to be connected to the SYMAT 40. PDF Overview PLC Measurement-System EN 50561-1
|
||||||||||||||||||||||||||||||
OTHER PRODUCTS IN THE SAME CATEGORY:
NTFM 8158, ISN for unshielded Cat 6 lines, Acc CISPR 32
8158 Mag Base, Magnetic Cover for ISN 8158 to attach ISN to steel wall
ISN S1, ISN for Coax Acc CISPR 32
ISN S8, ISN for Shielded Telecom lines, Acc CISPR 32
CAT3 8158, ISN for unshielded Cat 3 lines, Acc CISPR 32
CAT5 8158, ISN for unshielded Cat 5 lines, Acc CISPR 32
SYMAT 40, Symmetrical Step Attenuator, 100 Ohms acc. EN 50561-1
ISN 50561-1, ISN for PLC measurement, acc. EN 50561-1
NTFM 8131, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32
ISN 50561-3 - Impedance Stabilization Network
PILOT ISN, 150 kHz - 30 MHz, 1.4A, PLC
CS-50, 2 way splitter, 50 Ohms acc. EN 50561-1
SPLIT 100, 2 way splitter, 100 Ohms acc. EN 50561-1
SY 9223-50561-1, Symmetrical Transformer, 50 to 100 Ohms acc. EN 50561-1
CU 50561-1, Coupling Unit , acc. EN 50561-1
AC Separator, acc. EN 50561-1
SY 9223-PLC-AAN, PLC bypass
AN-ABCD-300, 300 Amp Artificial Network, EV HV Testing
AN-ABCD-60, 60 Amp Artificial Network, EV HV Testing
