NTFM 8131, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32
- T-ISN 150 Ohm asymmetric
- BNC-jack 50 Ohm unsymmetric
- 2-wire
- 400 V, 3 A AC
- 9 kHz - 30 MHz
- CISPR 22 D1, EN55015-2002, CISPR 32, CISPR 15
PARTNER:
MARKETS:
TEST STANDARDS:
Data Sheet
SPECIFICATIONS
NTFM 8131, ISN for 2 unshielded Unsymmetrical lines, Acc CISPR 32The "Impedance Stabilisation Network", also known as T-LISN, are used to measure the asymmetrical interference voltage on symmetrical data or telecommunication lines. Since 2002 the T-LISN is used for measurements of the asymmetrical disturbance voltage according to EN 55015 (electrical lighting equipment). Furthermore, it can be used for measurements according to CISPR 32 and CISPR 15. In contrast to the widely used T-LISN the NTFM 8131 was designed to withstand 400 V AC at maximum currents of 3 A.
|
OTHER PRODUCTS IN THE SAME CATEGORY:
NTFM 8158, ISN for unshielded Cat 6 lines, Acc CISPR 32
8158 Mag Base, Magnetic Cover for ISN 8158 to attach ISN to steel wall
ISN S1, ISN for Coax Acc CISPR 32
ISN S8, ISN for Shielded Telecom lines, Acc CISPR 32
CAT3 8158, ISN for unshielded Cat 3 lines, Acc CISPR 32
CAT5 8158, ISN for unshielded Cat 5 lines, Acc CISPR 32
ISN 50561-1, ISN for PLC measurement, acc. EN 50561-1
NTFM 8131, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32
ISN 50561-3 - Impedance Stabilization Network
PILOT ISN, 150 kHz - 30 MHz, 1.4A, PLC
CS-50, 2 way splitter, 50 Ohms acc. EN 50561-1
SPLIT 100, 2 way splitter, 100 Ohms acc. EN 50561-1
SYMAT 40, Symmetrical Step Attenuator, 100 Ohms acc. EN 50561-1
SY 9223-50561-1, Symmetrical Transformer, 50 to 100 Ohms acc. EN 50561-1
CU 50561-1, Coupling Unit , acc. EN 50561-1
AC Separator, acc. EN 50561-1
SY 9223-PLC-AAN, PLC bypass
AN-ABCD-300, 300 Amp Artificial Network, EV HV Testing
AN-ABCD-60, 60 Amp Artificial Network, EV HV Testing
