Pre-Compliance

Measure line and neutral conducted emissions with a two-channel FFT EMI receiver and built-in 16 A single-phase LISN. EMSCOPE supports common-mode and differential-mode analysis for filter development, with 30 MHz base coverage and an available 110 MHz upgrade. Add the optional CISPR 14-1 click meter license for discontinuous disturbance testing.

Pair EMSCOPE-RX2 with the external LISN your application requires. This two-channel FFT EMI receiver measures conducted emissions and separates common-mode and differential-mode noise, with 30 MHz base coverage and an available 110 MHz upgrade. A CISPR 14-1 click meter license is optional.

Measure three-phase conducted emissions and investigate common/differential-mode noise with the four-channel EMSCOPE platform. Choose RX4 for external-LISN testing or RX4LZ2 for an added built-in 16 A single-phase LISN. Three-phase testing uses a suitable external network. Click meter and frequency upgrades are available.

Absolute EMC has designed low-cost pre-compliance systems to meet a wide range of RF emissions and immunity needs. Some form of pre-complaint testing is a must for any company that needs to demonstrate their product for EMC compliance.  This enables companies to be responsive when issues happen and to also be proactive before going to the lab to better your chances of passing the first time. 

150 kHz to 8 GHz | External spectrum analyzer | 1,218-probe array

EMScanner helps engineers locate and compare PCB emission sources across a 316 x 218 mm scan area. A fixed array of 1,218 magnetic-field probes gives fast coverage, with 7.5 mm physical spacing and a manufacturer-stated 3.75 mm effective resolution. Use it with a compatible external spectrum analyzer and a PC running EMViewer.

150 kHz to 8 GHz | External spectrum analyzer | Down to 0.06 mm

EMScannerR helps engineers locate and compare PCB emission sources across a 316 x 218 mm scan area. Its eight selectable resolution levels run from 7.5 mm down to 0.06 mm for detailed investigation of dense boards. Use it with a compatible external spectrum analyzer and a PC running EMViewer.

Component-side scanning | Adjustable probe height | External analyzer

EMProbe automates a handheld near-field probe over the component side of a PCB or around a non-flat assembly. Program scan height and position in EMViewer, then acquire RF measurements with a compatible external spectrum analyzer. The compact arm is suited to repeatable bench investigations, with larger arm or extension configurations available for application-specific work.

5 E/H-field probes | Camera tracking | Live EMI visualization

NFP Kit adds camera-based position tracking to handheld near-field measurements. EMViewer recognizes the probe and measurement location from visible markers, helping engineers map emission sources while moving the probe by hand. The kit combines five electric/magnetic probes, a camera, mounting arm and measurement software with your compatible spectrum analyzer.

150 kHz to 6 GHz | Internal spectrum analyzer | Down to 0.06 mm

EMScannerR+ helps engineers locate and compare PCB emission sources across a 316 x 218 mm scan area. Its eight selectable resolution levels run from 7.5 mm down to 0.06 mm for detailed investigation of dense boards. The internal spectrum analyzer simplifies the measurement setup; a user PC runs EMViewer.

150 kHz to 6 GHz | Internal spectrum analyzer | 1,218-probe array

EMScanner+ helps engineers locate and compare PCB emission sources across a 316 x 218 mm scan area. A fixed array of 1,218 magnetic-field probes gives fast coverage, with 7.5 mm physical spacing and a manufacturer-stated 3.75 mm effective resolution. The internal spectrum analyzer simplifies the measurement setup; a user PC runs EMViewer.

6 axes | 450 mm radius | 0.01 mm positioning repeatability

EMProbe DBM E6 combines a six-axis robotic arm, near-field probes and EMViewer for repeatable component-side EMI investigations. The dedicated E6 datasheet specifies a 450 mm scan radius, scan spacing down to 0.1 mm and 0.01 mm positioning repeatability. Select the probe and compatible external analyzer to match the emissions and geometry being investigated.

Custom configuration | 6-axis robot | 900 mm working-radius example

EMProbe CR5 is a custom near-field scanning solution for larger DUTs and applications that need more reach than a compact bench arm. It combines a six-axis collaborative robot, application-specific probe mounting and EMViewer scan control with a compatible external spectrum analyzer. Each system is configured around the DUT geometry, probe selection, workspace and measurement objectives. Request a quotation for your application.