PG 14 - 1960, High Voltage Pulse Generator, 10/700µs, 0.5/700µs, 14kV

The high-voltage impulse generator PG 14-1960 generates standard impulse voltages with waveforms 10/700 µs. The output waveform can be switched to 0.5/700µs wave. Output voltage is adjustable between 0.2 kV and 14 kV. The polarity of the output voltage is selectable. Positive, negative or alternating polarity of the output voltage can be preselected.

PARTNER:

HILO-TEST

MARKETS:

Components ,
Wireless/Telecom ,

TEST STANDARDS:

CCITT-K17 -K20 -K22 ,
ITU-T/K44 ,

Data Sheet

SPECIFICATIONS

PG 14 - 1960

High voltage pulse generator

Switching surge:
10 / 700 µs & 0.5 / 700 µs
0.2 - 14 kV

According to

CCITT-K17/K20/K22

ITU-T/K44

VDE 0847

The high-voltage impulse generator PG 14-1960 generates standard impulse voltages with waveforms 10/700 µs. The output waveform can be switched to 0.5/700µs wave. The output voltage is adjustable between 0.2 kV and 14 kV. The polarity of the output voltage is selectable. Positive, negative or alternating polarity of the output voltage can be preselected.

It is designed for dielectric testing of components and systems acc. to CCITT-K17/K20/K22, ITU-T/K44, IEC 61000-4-5, EN 61000-4-5, VDE 0847. Two high-voltage outputs with a series resistor of 25 W for direct testing of A - B wires are available.

A built-in voltage divider 1000:1 allows monitoring of the impulse output waveform during testing.

PG 14-1960 features a microprocessor-controlled user interface and a 5” touch screen unit for ease of use. The microprocessor allows the user to execute either standard test routines or a “user-defined” test sequence. A standard USB port provides the ability to print a summary of the test parameters to a USB stick.

The software program HILO-REMOTE allows full remote control of the test generator via Ethernet light guide as well as documentation and evaluation of test results, accordingly to the IEC 17025. To record definite impulses, it is equipped with an Impulse Recording Function (IRF) Moreover all generator functions may be computer-controlled via the isolated optical interface.

TECHNICAL SPECIFICATIONS	PG 14-1960

Mainframe:
Microprocessor controlled touch panel	5”, 800X480, 24 bit
Optical Ethernet Interface for remote control of the generator	optional
Interface for saving reports	USB
External Trigger input	switch
External Trigger output	10 V at 1 kW
Connector for external safety interlock loop	24 V =
External red and green warning lamps	230 V, 60W
Mains power	230 V, 50/60 Hz
Dimensions of desk top case W * H * D	555604600 mm³
Weight	96 kg

High-voltage pulse generator
Impulse output voltage, adjustable	0.2-14.0 kV ± 5%
Polarity of output voltage/current, selectable	pos/neg/alt
Charging time	< 25 sec

Pulse forming networks:	selectable

a)Impulse voltage 10/700µs acc. To CCITT K17/K20	PFN 10/700
Energy storage capacitor	20 µF / 14.6 kV
Discharging resistor/ Series resistor	50 W/ 15 W
Load capacitor	0.2 µF
Wave form: front time/tail time	10 / 700 µs ±20%

b)Impulse voltage 0.5/700µs acc. to CNET	PFN 0.5/700
Load capacitance	0.007 µF
Wave form: front time/tail time	0.5 / 700 µs ± 30/20%

Direct pulse voltage output on the rear panel	coaxial
current limiting resistors	25 W / 25 W
for connection of external coupling devices Monitor output for pulse output voltage	ratio = 1000 : 1 ± 5%

Option :
Software HILO-REMOTE, for remote control
With Impulse Recording Function (IRF)
( XP, WIN7, WIN8, WIN10 ) incl. 5m long light guide and PC Ethernet interface
Option :
Description of Remote control commands
Incl. Ethernet PC-interface and 5m long light-guide
Option :
Different test cabinets