The Haefely ONYX is a state-of-the-art electrostatic discharge test system that is available in 8 kV version.

ONYX VISION 30, 30kV ESD Simulator w/Camera

Gallery ONYX VISION 30, 30kV ESD Simulator w/Camera

ONYX VISION 30, 30kV ESD Simulator w/Camera

A 30 kV ESD simulator for contact and air discharge immunity testing. Its integrated 1.5-megapixel camera displays the test point on a 3.5-inch color touchscreen and saves photographs before and after an impulse.

Includes a 150 pF / 330 ohm RC network, two rechargeable batteries and USB-C charging. The 30 kV model provides the highest listed family voltage; lower-voltage models can be upgraded with a purchased unlock code.

PARTNER:

HAEFELY EMC

MARKETS:

CATEGORIES:

TEST STANDARDS:

SPECIFICATIONS

HAEFELY | CAMERA-ASSISTED ESD TESTING

ONYX VISION 30: 30 kV ESD simulator with built-in camera

See the test point. Document the discharge. Test up to 30 kV.

30 kV contact & air	Live camera view	30 kV capability
1–30 kV output range; positive and negative polarity.	1.5 MP camera; images before and after an impulse.	Highest voltage range in the ONYX VISION family.

Document ESD test points with the integrated camera, then repeat tests using stored sequences, a configurable smart key and automatic polarity switching.

Full 30 kV capability for contact and air discharge testing.
The ONYX VISION platform is offered in 8, 16 and 30 kV versions. The 8 and 16 kV versions can be upgraded with purchased unlock codes. ONYX VISION 30 provides the highest listed family voltage. Select the discharge network and accessories required for your application.

ONYX VISION feature overview

Camera-assisted ESD testing

View the impulse point directly on the simulator and capture photographs before and after a discharge. The internal 8 GB microSD card stores more than 1,000 pictures for later review, troubleshooting and reporting. The brochure photograph illustrates the shared ONYX VISION family hardware. This model provides up to 30 kV output.

Feature	What it provides
1.5-megapixel integrated camera	Live impulse-point view and saved before/after photographs.
3.5-inch TFT color touchscreen	On-instrument settings, test selection and camera view.
Configurable smart key and multilingual interface	Quick access to frequently used actions; define, store and load test sequences.
Integrated LED test light	Illuminates the discharge location with automatic on/off operation.
Automatic tip detection and improved retention	Interchangeable discharge tips with secure retention.
Ergonomic housing	Rubberized handle, robust trigger and raised rubber logos to help protect contacted surfaces.
Exchangeable RC networks	User-changeable networks; compatibility with RC modules from the previous ONYX generation.
Flexible power and control	Battery or mains operation, USB-C charging, Wi-Fi, Bluetooth and optical interface support.

Interchangeable networks	Touchscreen operation	Illuminated test point

ONYX VISION 30 technical specifications

Specification	Value	Specification	Value
Air discharge voltage	1–30 kV	Contact discharge voltage	1–30 kV
Voltage resolution	100 V steps	Discharge polarity	Positive and negative; automatic polarity switching
Operating modes	Single and continuous	Discharge repetition	Single; 0.1 / 0.2 / 0.5 / 1 / 2 / 5 / 10 / 20 Hz
Discharge counter	1–9,999	Default RC network	150 pF / 330 ohms
Display	3.5-inch TFT color touchscreen	Camera	Integrated 1.5-megapixel sensor; live view and before/after photographs
Image storage	Internal 8 GB microSD card; more than 1,000 pictures	Battery life	Greater than 16 hours, as listed in the brochure
Power / charging	Battery or mains operation; USB-C charging	Power consumption	17 VA
Dimensions, W × H × D	286 × 319 × 112 mm, including camera	Weight	1.69 kg
Interfaces	Wi-Fi, Bluetooth and optical (LWL)	Voltage upgrade	Highest listed family voltage; no higher-voltage upgrade listed

Included components

Illustrative case configuration and standalone view of the same product. Optional accessories may be shown; standard supplied components are listed below.

Component	Included provision
ESD simulator	ONYX VISION 30, 30 kV configuration
Discharge tips	Contact discharge tip and air discharge tip
RC module	150 pF / 330 ohms for IEC 61000-4-2 test applications
Battery packs	Two rechargeable battery packs
Charging equipment	USB-C battery charger with country-specific mains plugs; included charging stand shown in the overview
Ground cable	Included
Transport	Carrying case
Documentation	Quick-start guide, manual on CD and calibration certificate

Options and Accessories

Choose discharge networks, tips, support equipment and calibration options for your test setup. The illustrated selection combines current ONYX VISION options with compatible accessories from the ONYX range.

ONYX VISION 30 provides up to 30 kV. Match the discharge tip and RC network to the required test method. The 8 and 16 kV versions can reach higher family voltage ranges through purchased unlock codes.

RC Modules for Pulse shape forming.

Accessory	Description / selection notes	Part number
RC Module 150 pF / 2’000 Ω	ISO 10605	No. 4700531
RC Module 330 pF / 2’000 Ω	ISO 10605	No. 4700532
RC Module 330 pF / 330 Ω	ISO 10605	No. 4700618
RC Module 100 pF / 1’500 Ω		No. 4700622
RC Module 150 pF / 150 Ω		No. 4700620
RC Module 500 pF / 500 Ω		No. 4700619
RC Module 500 pF / 5’000 Ω		No. 4700621
Custom RC Module	50 pF .. 1 nF / 50 Ω .. 5’000 Ω	No. 4700633

Tips

Accessory	Description / selection notes	Part number
30kV AD Tip	Discharge tip 30 mm diameter for improved air discharge testing up to 30 kV	No. 4700526
Fast Rise Time Tip	Fast rise Tip Reduces the rise time of the ESD-pulse to 0.3 ns for reliability.	No. 4700527
Air Discharge Tip	Air discharge tip included with ONYX VISION. The existing ONYX listing specifies up to 25 kV for this pictured tip; confirm the tip required for higher-voltage testing. Output is limited by the installed voltage license.	On request
Contact Discharge Tip	Contact discharge tip included with ONYX VISION.	On request
Extended contact discharge tip	Extended neck for precision access to recessed test points.

Software

Accessory	Description / selection notes	Part number	Picture
ESDVision Basic	App-based remote control and reporting for iOS and Android. Create test plans, load preloaded standards and generate reports. Wi-Fi, Bluetooth or optical connection support.
ESDVision Pro	Extended app-based remote control and reporting features. Includes a fiber-optic interface for a wired connection.

Others

Accessory	Description / selection notes	Part number
ONYX Balancer	Balancing tool with the mounting system up to 2.3 kg	No. 4700813
A-ESD Balancer	Absolute EMC support arm with balancer for an ESD test station, constructed from non-metal parts. Compatible with ONYX VISION.	On request
PET 4000	ESD waveform verification set for IEC/EN 61000-4-2. The existing listing specifies a 30 dB attenuator; confirm the supplied calibration scope when ordering.	No. 4700480
HCP Horizontal coupling plane	1.6 m x 0.8 m for indirect application of the ESD. Includes cable with two integrated 470 kΩ HV-Resistors	No. 2496881
VCP Vertical coupling plane	0.5 m x 0.5 m for indirect application of the ESD. Includes cable with two integrated 470 kΩ HV-Resistors	No. 2495581
Resistor Cable	2 x 470 kOhm Resistors in Cable (already included in HCP / VCP)	No. 2498101
ESD Test Table	1.60 x 0.8 m, made of wood without any metallic parts, as required by IEC 61000-4-2 The linked Absolute EMC table is an alternative product; specify the desired supplier when ordering.	HAEFELY table: 2496871
Onyx Battery Pack	Single battery pack for ONYX ESD guns. Qty 2 required for purchase (2 Batteries included with Onyx)	No. 4700585

Factory Calibration is included with the unit

Accessory	Description / selection notes	Part number
AccCal - ONYX1	ISO 17025 Accredited Calibration of ONYX with 1 RC module	No. 2499981
AccCal - ONYX2	ISO 17025 Accredited Calibration of ONYX with 2 RC module	No. 2499986
AccCal - ONYX3	ISO 17025 Accredited Calibration of ONYX with 3 RC modules	No. 2499987
AccCal - ONYX4	ISO 17025 Accredited Calibration of ONYX with 4 RC module	No. 2499988

ESD test applications and referenced standards

Use ONYX VISION 30 for ESD immunity testing within its 30 kV contact and air discharge range. Applications include product development, troubleshooting and repeatable testing of electronic equipment. The highest listed ONYX VISION output is 30 kV; verify that your test plan is within this range.

Application group	References listed in the supplied family brochure
General ESD immunity	IEC 61000-4-2:2025 (Edition 3); EN IEC 61000-4-2:2025
Industrial and measurement equipment	IEC 61326-1:2020; IEC 61000-6-1:2016 / IEC 61000-6-2:2016
Medical electrical equipment	IEC 60601-1-2:2014 + AMD1:2020
Automotive	ISO 10605:2023 (Edition 3); GMW 3097 (Issue 14, 2025); Ford FMC1278; PSA B21 7110
Military and aviation	MIL-STD-331D (2017); MIL-STD-464D (2020); RTCA DO-160G + Change 1
Telecommunications and guidance	ITU-T K.20 (11/2022); GR-1089-CORE (Issue 7); GR-78-CORE (Issue 2); ANSI C63.16-2016 (guide)

These are family-level application references. Applicable tests depend on the voltage model, RC network, accessories and validated setup. The highest listed family voltage is 30 kV. Use the OEM specification revision required by the customer or vehicle program; the references do not imply compliance with every requirement of each standard.

Practical questions

How does ONYX VISION 30 compare with the unlock-code versions?

ONYX VISION 30 provides the highest listed family voltage from the start. The 8 and 16 kV versions can be upgraded to a higher family voltage using a purchased unlock code. No voltage option above 30 kV is listed.

Does the camera measure the ESD waveform?

The camera provides a live view and photographs of the test area. Waveform verification requires the appropriate verification equipment, such as the optional PET 4000 and a suitable measurement setup.

Can I reuse my existing ONYX RC modules?

The brochure states compatibility with RC modules from the previous ONYX generation. Select the module appropriate to the required waveform and test method.

How should I select tips and networks for 30 kV testing?

Select a discharge tip and RC network rated and validated for the required voltage and test method. The optional 30 kV air discharge tip is listed for air testing up to 30 kV; confirm the supplied tip configuration when ordering.

Is software included?

ESDVision Basic and Pro are listed as optional software. The instrument includes its touchscreen interface; specify the software option required for remote control and reporting.

Compare ONYX VISION 8, 16 and 30

Feature	ONYX VISION 8	ONYX VISION 16	ONYX VISION 30
Family hardware
Contact discharge	1–8 kV	1–16 kV	1–30 kV
Air discharge	1–8 kV	1–16 kV	1–30 kV
Higher voltage by purchased unlock code	Upgrade to a higher-voltage configuration	Upgrade to 30 kV	Highest listed family voltage
Camera / touchscreen	1.5 MP / 3.5-inch color TFT	1.5 MP / 3.5-inch color TFT	1.5 MP / 3.5-inch color TFT
Default RC network	150 pF / 330 ohms	150 pF / 330 ohms	150 pF / 330 ohms
Voltage steps	100 V	100 V	100 V
Repetition	Single; 0.1–20 Hz (listed steps)	Single; 0.1–20 Hz (listed steps)	Single; 0.1–20 Hz (listed steps)
Polarity	Positive and negative	Positive and negative	Positive and negative
Battery life	>16 hours	>16 hours	>16 hours
Weight	1.69 kg	1.69 kg	1.69 kg

All three versions share the camera-assisted ONYX VISION platform. Choose the voltage range that meets your test plan. Select a model above to view its product page.

OTHER PRODUCTS IN THE SAME CATEGORY: