• SESD 302x Test tip's for ESD

SESD 302x Test tip's for ESD

Avalible ESD Test Tips for replacment or different aplications.

PARTNER:

MARKETS:

TEST STANDARDS:

Data Sheet

SPECIFICATIONS

 

 

Test tip´s for ESD

 

For air discharge

In this method, the pulse is triggered by approaching the test specimen. The high voltage applied to the test tip is discharged abruptly, resulting in a very broadband high-frequency interference spectrum. Air discharge is used where contact discharge is not possible - e.g. on plastic housings.

 

SESD 3020*    

Standard probe according to IEC/EN 61000-4-2

(1)

 

Diameter

8± 1mm

 

 

Length

50± 1mm

 

 

 

SESD 3025

For air discharge > 16 kV

(2)

 

Diameter

30± 1mm

 

 

Length

50± 1mm

 

 

For contact discharge

In this method, the test probe of the generator is placed directly on the test specimen. The actual "pulse release" takes place via a relay contact and reduces the influence factors such as approach speed, humidity, temperature, etc. The contact discharge is reproducible and therefore the preferred test method.

 

Standard probe according to IEC/EN 61000-4-2

SESD 3021*

Length

50± 1mm

(3)

SESD 3022

Length

75± 1mm

(4)

 

Test tip with spring contact and corrugated contact surface for contacting small surfaces

SESD 3026

Length

(50 + 10) ± 1mm

(5)

SESD 3027

Length

(75 + 10) ± 1mm

(6)

* Included in the scope of delivery of SESD 216, SESD 230 and SESD 30000.

 

 

OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...