ESD - Generators verified according to the standard International Electro technical Commission 61000-4-2, ISO 10605 and other. The measurements of the single pulses take place with a special 2 ohm shunt. For the correct verification of the ESD impulses an oscilloscope is necessary with a minimum bandwidth of - 2 GHz acc. IEC 61000-4-2, 2008 and - 1 GHz acc. ISO 10605, 2008. The ESD verification set SESD 8800-4 works up to 4 GHz and fulfilled the request of the double bandwidth regarding to the measurement bandwidth.
PARTNER:
MARKETS:
TEST STANDARDS:
SESD 8800-4
ESD - Generators verified according to the standard International Electro technical Commission 61000-4- 2, ISO 10605 and other. The measurements of the single pulses take place with a special 2 Ω shunt. For the correct verification of the ESD impulses an oscilloscope is necessary with a minimum bandwidth of
- 2 GHz acc. IEC 61000-4-2, 2008 and
- 1 GHz acc. ISO 10605, 2008.
The ESD verification set SESD 8800-4 works up to 4 GHz and fulfilled the request of the double bandwidth regarding to the measurement bandwidth.
Structure: In accordance with IEC/EN 61000-4-2, ISO 10605 and other Measurement resistor 2 Ω target: 1,96 Ω +/- 2,5% with connected attenuator
Attenuator: Weinschel Model 2, 20dB
Test lead: Low Loss cable 1m (0,7m) with BNC-connector (Oscilloscope side)
Deviation of the insert attenuation: +/- 0,5 dB until 1 GHz
+/- 1,2 dB between 1 GHz and 4 GHz
Measurement with attenuator and cable
Maximum pulse voltage: 30 kV
Weight: 550 g
Part code: SESD 8800-4
· 2 Ohm ESD – target (4 GHz)
· 20 dB attenuator
· Coax cable 1m
· Calibration certificate (PTB) with data of the S-parameters in the frequency range up to 4 GHz