Langer RFS Scanner Probes | 30 MHz to 3 GHz

30 MHz to 3 GHz | 7 probe models | Passive | SMA connection

RFS combines passive H-field and E-field scanner geometries for general PCB EMC development from 30 MHz to 3 GHz. Start with a larger-area probe to locate the source, then select a smaller head or electrode for the detailed scan.

TEST STANDARDS:

Select Options/Sizes:

RFS set - Datasheet

RFS-R 50 - Datasheet

RFS-R 3-2 - Datasheet

RFS-R 0.3-3 - Datasheet

RFS-B 3-2 - Datasheet

RFS-B 0.3-3 - Datasheet

RFS-E 03 - Datasheet

RFS-E 10 - Datasheet

SPECIFICATIONS

RFS scanner probes

RFS combines passive H-field and E-field scanner geometries for general PCB EMC development from 30 MHz to 3 GHz. Start with a larger-area probe to locate the source, then select a smaller head or electrode for the detailed scan.

All published scalar specifications are consolidated below. Click each small response, correction-curve or geometry image to open the full-size image in a new tab. Missing numeric resolution or length values are not inferred from model names or photographs.

Specification / viewRFS-R 50RFS-R 3-2RFS-R 0.3-3RFS-B 3-2RFS-B 0.3-3RFS-E 03RFS-E 10
Product picture RFS-R 50 RFS-R 3-2 RFS-R 0.3-3 RFS-B 3-2 RFS-B 0.3-3 RFS-E 03 RFS-E 10
Field type H-field H-field H-field H-field H-field E-field E-field
Included in RFS set Yes - included No - separate probe No - separate probe Yes - included No - separate probe Yes - included No - separate probe
Frequency range 30 MHz ... 3 GHz 30 MHz ... 3 GHz 30 MHz ... 3 GHz 30 MHz ... 3 GHz 30 MHz ... 3 GHz 30 MHz ... 3 GHz 30 MHz ... 3 GHz
Probe head dimensions diameter 10 mm diameter approx. 3 mm diameter approx. 2 mm diameter 2 mm diameter approx. 2 mm approx. (4 x 4) mm approx. (0.5 x 2) mm
Connector - output SMA, male, plug SMA, male, jack SMA, male, jack SMA, male, plug SMA, male, jack SMA, male, plug SMA, male, jack
Length approx. 55 mm Not specified Not specified approx. 55 mm Not specified approx. 55 mm Not specified
Resolution Not specified approx. 1 mm < 1 mm Not specified < 1 mm Not specified approx. 0.2 mm
Use and orientation H-field; larger-area source search over components and cables, at distances up to approximately 3 cm. Use for overview scans before selecting a finer probe. H-field; fine mapping near traces, IC pins and packages, decoupling capacitors and EMC components. Align the sensing plane with the field being investigated. H-field; small head for sub-millimeter localization at small components and hard-to-reach IC pins. H-field; coil orthogonal to the shaft. Detects field lines normal to the DUT surface; field lines entering laterally are not detected. Close placement gives stronger coupling. H-field; coil at 90 degrees to the shaft, for very small-scale sensing directly at the DUT. E-field; approximately 4 x 4 mm electrode underneath the head detects clocked traces, IC pins and small components. E-field; approximately 0.2 mm electrode width for fine localization at 0.1 mm traces and individual pins on high-pin-count ICs.
Sensing orientation
Click image for full view
RFS-R 50 - Sensing orientation / measuring principle
Sensing orientation / measuring principle
RFS-R 3-2 - Sensing orientation / measuring principle
Sensing orientation / measuring principle
RFS-R 0.3-3 - Sensing orientation / measuring principle
Sensing orientation / measuring principle
RFS-B 3-2 - Sensing orientation / measuring principle
Sensing orientation / measuring principle
RFS-B 0.3-3 - Sensing orientation / measuring principle
Sensing orientation / measuring principle
RFS-E 03 - Sensing orientation / measuring principle
Sensing orientation / measuring principle
RFS-E 10 - Sensing orientation / measuring principle
Sensing orientation / measuring principle
Frequency response
Click image for full view
RFS-R 50 - Frequency response
Frequency response
RFS-R 3-2 - Frequency response [dBuV] / [dBuA/m]
Frequency response [dBuV] / [dBuA/m]
RFS-R 0.3-3 - Frequency response [dBuV] / [dBuA/m]
Frequency response [dBuV] / [dBuA/m]
RFS-B 3-2 - Frequency response
Frequency response
RFS-B 0.3-3 - Frequency response [dBuV] / [dBuA/m]
Frequency response [dBuV] / [dBuA/m]
RFS-E 03 - Frequency response
Frequency response
RFS-E 10 - Frequency response [dBuV] / [dBuA/m]
Frequency response [dBuV] / [dBuA/m]
H-field correction curve
Click image for full view
RFS-R 50 - H-field correction curve [dBuA/m] / [dBuV]
H-field correction curve [dBuA/m] / [dBuV]
RFS-R 3-2 - H-field correction curve [dBuA/m] / [dBuV]
H-field correction curve [dBuA/m] / [dBuV]
RFS-R 0.3-3 - H-field correction curve [dBuA/m] / [dBuV]
H-field correction curve [dBuA/m] / [dBuV]
RFS-B 3-2 - H-field correction curve [dBuA/m] / [dBuV]
H-field correction curve [dBuA/m] / [dBuV]
RFS-B 0.3-3 - H-field correction curve [dBuA/m] / [dBuV]
H-field correction curve [dBuA/m] / [dBuV]
Not published Not published
Current correction curve
Click image for full view
RFS-R 50 - Current correction curve [dBuA] / [dBuV]
Current correction curve [dBuA] / [dBuV]
RFS-R 3-2 - Current correction curve [dBuA] / [dBuV]
Current correction curve [dBuA] / [dBuV]
RFS-R 0.3-3 - Current correction curve [dBuA] / [dBuV]
Current correction curve [dBuA] / [dBuV]
RFS-B 3-2 - Current correction curve [dBuA] / [dBuV]
Current correction curve [dBuA] / [dBuV]
RFS-B 0.3-3 - Current correction curve [dBuA] / [dBuV]
Current correction curve [dBuA] / [dBuV]
Not published Not published
E-field correction curve
Click image for full view
Not published Not published Not published Not published Not published RFS-E 03 - E- field correction curve [dBuV/mm] / [dBuV]
E- field correction curve [dBuV/mm] / [dBuV]
RFS-E 10 - E- field correction curve [dBuV/mm] / [dBuV]
E- field correction curve [dBuV/mm] / [dBuV]

RFS set - three-probe package

RFS set, Scanner Probes 30 MHz up to 3 GHz

The RFS set includes RFS-B 3-2, RFS-E 03 and RFS-R 50, one SMA-SMA 1 m measuring cable and a case described as holding four RFS probes. The package contains three probes, not four.

Included itemQuantity
RFS-B 3-2, Scanner Probe 30 MHz up to 3 GHz 1x
RFS-E 03, Scanner Probe 30 MHz up to 3 GHz 1x
RFS-R 50, Scanner Probe 30 MHz up to 3 GHz 1x
SMA-SMA 1 m, SMA-SMA Measuring Cable 1x
RFS case, System Case for 4 RFS-probes 1x

RFS set - Datasheet

Using the curves and geometries

Frequency-response plots show the model-specific response. H-field, E-field and current correction curves are separate quantities: use the appropriate curve, units, distance and setup when converting receiver voltage to a field or current estimate. A probe is directional; keep the sensing orientation and probe-to-DUT spacing consistent between scans. The source tables use both "SMA male plug" and "SMA male jack" wording; verify the mating cable rather than silently treating the terms as different probe genders.

Datasheets and reference documents

ProductDocument
RFS-R 50 RFS-R 50 - Datasheet
RFS-R 3-2 RFS-R 3-2 - Datasheet
RFS-R 0.3-3 RFS-R 0.3-3 - Datasheet
RFS-B 3-2 RFS-B 3-2 - Datasheet
RFS-B 0.3-3 RFS-B 0.3-3 - Datasheet
RFS-E 03 RFS-E 03 - Datasheet
RFS-E 10 RFS-E 10 - Datasheet

Scanner probe family comparison

FamilyModelsCoverageField typesChoose for
LFS-B 3LFS 1 100 kHz-50 MHz H Low-frequency switching-current and magnetic-field mapping.
RFS-R 50RFS 7 30 MHz-3 GHz H and E General PCB investigations with large-area and fine-resolution geometries.
XFS-R 3-1XFS 4 30 MHz-6 GHz H and E PCB near-field mapping when coverage above 3 GHz is needed.

The passive scanner probes below have model-specific SMA connections and no power supply in their published specification. ICR near-field microprobes are a separate precision-probe class; use the existing ICR near-field microprobe range when micrometer-scale sensing is needed.

Compare all scanners and individual scanner probes

OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...