ECSS LISN 3, 10 Hz - 150 MHz, 10A, DC Lines, LISN
- European Cooperation for Space Standardisation -LISN Line Impedance Stabilization Network
- 10 Hz - 150 MHz
- Max current 10A, (15A 15min)
- Impedance of each path: 0.7 μH || 50 Ω
Data Sheet
SPECIFICATIONS
ECSS LISN 3, 10 Hz - 150 MHz, 10A, DC Lines, LISNThe ECCSS LISN 3 was developed following the „European Cooperation for Space Standardisation“. The ECSS LISN 3 is used for DC mains lines. The redwing terminal must be connected to the positive voltage, the black terminal to the negative. The impedance characteristic of each path is basically realized by an inductor in parallel with the 50 Ohm resistor: 0.7 μH || 50 Ω. The device under test has to be connected to the terminals at the front panel. The supply voltage has to be connected at the back panel. The device under test may drain a continuous current of 10 A and for a short period of time, it may even drain more than 15 A.
|
OTHER PRODUCTS IN THE SAME CATEGORY:
ECSS LISN 2-75A, 10 Hz - 150 MHz, 75A, DC Lines, LISN
ECSS LISN 2, 10 Hz - 150 MHz, 10A, DC Lines, LISN
NPCL 8500, 3 - 148 kHz, PRIME PLC LISN
TEMP 8400, 9 kHz - 1 GHz, TEMPEST AMN (LISN)
PVDC 8300, 150 kHz - 30 MHz, 100A, DC-AMN (LISN) Photovoltaic Inverters
PVDC 8301, 150 kHz - 30 MHz, 200 A, DC-AMN (LISN) Photovoltaic Inverters
ECSS LISN 1, 10 Hz - 150 MHz, 10A, DC Lines, LISN
PILOT ISN, 150 kHz - 30 MHz, 1.4A, PLC
AN-ABCD-300, 300 Amp Artificial Network, EV HV Testing
AN-ABCD-60, 60 Amp Artificial Network, EV HV Testing
CABCISPR2532A, CISPR 25, 5uH, 32 A LISN
CABCISPR2515A, CISPR 25, 5uH, 15 A LISN
NSLK 8117, 9 kHz - 30 MHz, 250V / 10A, 50 µH, 2 Path LISN
NNBM 8124, 10 kHz - 150(400) MHz, High Voltage, 70A, single path, 5µH LISN
MDS 21 C, 30 - 1000 MHz, EMI Absorbing Clamp
NTFM 8131 A, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32
NNBM DO160-1500, 10 kHz - 400 MHz, 200A, 5µH LISN, DO-160
NNBM 8126 A890, 10 kHz - 400 MHz, 75A, 5µH LISN, DO-160
NNBL 8226-2, 9 kHz - 100 MHz, 70A, 50µH, Two Path LISN
