EMC EPS Block - 10 x 10 x 5 cm, EUT support

The original EMC EPS Block is white Expanded Polystyrene can optional be covered in a vinyl covering on top and sides or with a painted coating to extend durability. They come in dimensional metric sizes of 10 x 10 x 5 cm. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. The EMC EPS Block is crush resistance able to withstand heavy weight loads without deforming. 1cm marking on 6 sides allows for easy positioning and test setups. They are conveniently sold in kits in tote bins for secure storage.

Data Sheet

SPECIFICATIONS

   

EMC EPS Block- EUT Support Blocks 10 x 10 x 5cm 

Use EMC EPS Cube, Blocks, and Rods for IEC, ISO, CISPR, MIL-STD, and DO160 testing. It has stable dielectric properties better than wood, not retaining moisture and giving better results for testing over time. Our EPS materials are made of a heavier density than standard commercial applications (i.e. Foam sheets from a home store). This gives our products a >50% higher durability. If you have requirements for a hundred lbs/kgs heavy loads, please see our line of EMC PLA Block Kits.

 

Specifications:

 

Material: Expanded Polystyrene (EPS) Optional Coatings:   Vinyl Sticker or Painted surface
Sizes Block: 10x10x5cm   ±2%    
       
Permittivity: 1.02-1.04 of EPS    
Minimum Density: 3.00 lb/ft³ (48 kg/m³)    
Compressive Strength: 60.0  psi (414 kPa) Other: 1cm marking 6 sides

 

 

Kits:

 

EMC EPS Blocks -S 25 Blocks, Plastic Tote (5 kg/10lb)
EMC EPS Blocks -M 50 Blocks Plastic Tote (7 kg/15lb)
EMC eps Blocks -L 100 Blocks Plastic Tote (14kg/30lb)
   

 

 

 

 

 Support requirements for basic standards:

 

Standard

IEC 61000-4-4

IEC 61000-4-6

IEC 61000-4-18

MIL-STD-461

DO160

EUT Support

10cm

10cm

10cm

NA

NA

Cable Support

10cm

>3cm

10cm

5cm

5cm

 

 

 

 

OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...