EFT 2012 EFT/Burst Capacitive Coupling Clamp
The Capacitive Coupling Clamp, EFTC 2012, provides the ability to couple Burst / EFT pulses to data lines. It can also be used for coupling to main lines where no CDN is available, for example, high current lines >200 A.
PARTNER:
MARKETS:
TEST STANDARDS:
Data Sheet
SPECIFICATIONS
EFTC 2012
Capacitive Coupling Clamp for Burst / EFTG impulses
|
According to |
|
IEC 61000-4-4 : 2012 Ed 3.0 |
|
IEC 61000-4-4 : 2004 Ed 2.0 |
The Capacitive Coupling Clamp, EFTC 2012, provides the ability to couple Burst / EFT pulses to data lines. It can also be used for coupling to main lines where no CDN is available, for example, high current lines >200 A.
Calibrated with calibration kit acc. to IEC 61000-4-4 : 2012 Ed 3.0
|
Technical Specification |
EFTC 2012 |
|
|
|
|
Dimensions: W * H * L |
140 * 180 *1100 mm³ |
|
Incl. coaxial connection cable, Fischer Coax |
ca. 1 m long |
|
Max. cable diameter |
ca. 42 mm |
OTHER PRODUCTS IN THE SAME CATEGORY:
Warning light
ESD Test Table Kit
EFTC-CK Calibration kit for burst coupling clamps
BCK 400 F Calibration kit for EFT/burst Generators
IMP 8, Impedance matching network for IEC 61000-4-5
SCK 105, Surge Calibration Kit
SCK 105 inBox, Surge Calibration Kit
VPS 250, Automatic Variack 0-250V 16Amps
Foot-switch Trigger
EFT 2012 EFT/Burst Capacitive Coupling Clamp
CAR CDN 2012 EFT/Burst Capacitive Coupling Clamp ISO
ESD-Static Dissipation Brush, referenced in EN 61000-4-2
ABSOLUTE EMC Monopole Probe Stand
CCK20 Calibration kit for: PG 10-200, PG 12-360 and PG 20-100
EMC EPS Block - 10 x 10 x 5 cm, EUT support
EMC PLA Block Lab kits, 10 x 10 x 5 cm
Absolute EMC Monopole Antenna Stand
EMC EPS Bar- 1m long 5cm height, EUT/cable support
EMC EPS 70cm Support- EUT support
