EMSCOPE-RX2, 9kHz - 110MHz, 2 channel Receiver
EMSCOPE-RX4, 9kHz - 110MHz, 4 channel Receiver for 3 phase
AB-Precompliant Test Kits
TBMR-110M DC - 110 MHz high speed EMI-Analyzer
LSAOL 1.0, Laser Powered RF Link, 9kHz - 6GHz w/5-12VDC 2W power sourse
LSAOL 1.1, Laser Powered RF Link, 9kHz - 6GHz
Products
EMSCOPE, 9kHz - 110MHz, 2 channel Receiver/LISN
EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak, and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
EMSCOPE-RX2, 9kHz - 110MHz, 2 channel Receiver
EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak, and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
EMSCOPE-RX4, 9kHz - 110MHz, 4 channel Receiver for 3 phase
EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak, and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
- Measure 4 lines of 3 phase LISN
- The picture is shown with internal LISN [EMSCOPE RX4 LZ2]
AB-Precompliant Test Kits
Absolute EMC has designed low-cost pre-compliance systems to meet a wide range of RF emissions and immunity needs. Some form of pre-complaint testing is a must for any company that needs to demonstrate their product for EMC compliance. This enables companies to be responsive when issues happen and to also be proactive before going to the lab to better your chances of passing the first time.
TBMR-110M DC - 110 MHz high speed EMI-Analyzer
The TBMR-110M EMI Analyzer is designed to carry out conducted emission measurements. Its affordability and versatility make it a perfect tool for engineers doing pre-compliance measurements during the development process.
- True DC – 110 MHz measurement range
- CISPR-16, ANSI and MIL-STD compliant detectors
- Peak, Quasi-Peak, Average, CISPR Average, RMS and CISPR RMS dectectors working in parallel
- Zero Span operation with time domain triggering
- Linear, log amplitude and frequency display
LSAOL 1.0, Laser Powered RF Link, 9kHz - 6GHz w/5-12VDC 2W power sourse
The LSAOL 1.0/1.1 Laser-Powered Analog Optical Links with integrated pre-amplifiers are low-noise RF signal transmission systems for 9 kHz to 6 GHz.
- They are ideally suited for EMC emission testing.
- The need for batteries is eliminated through laser-powered operation.
- The LSAOL Front Unit is laser-powered and equipped with both low and high-band pre-amplifiers
- LSAOL 1.0 provides an adjustable, 5 V to 12 V phantom power supply delivering up to 2W to external devices such as active antennas or pre-amplifiers.
LSAOL 1.1, Laser Powered RF Link, 9kHz - 6GHz
The LSAOL 1.0/1.1 Laser-Powered Analog Optical Links with integrated pre-amplifiers are low-noise RF signal transmission systems for 9 kHz to 6 GHz.
- They are ideally suited for EMC emission testing.
- The need for batteries is eliminated through laser-powered operation.
- The LSAOL Front Unit is laser-powered and equipped with both low and high-band pre-amplifiers
- LSAOL 1.0 provides an adjustable, 5 V to 12 V phantom power supply delivering up to 2W to external devices such as active antennas or pre-amplifiers.
