Magnetic Conducted Immunity

The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. IEC 60601-1-2 calling out IEC 61000-4-39 magnetic immunity for close proximity testing requirements can also now be met with the 10 kHz unit. 

• Compensation Network
• For HFRA 5164
• up to 26 A/m @ 50 Watts
• 13.56 MHz

• Nominal frequency range: DC - 1 kHz
• Nominal measuring range: 0 - 7000 A/m
• Extended measuring range: 0 - 9000 A/m
• Nominal conversion factor: 1 (A/m)/mV

• Compensation Network
• For: HHS 5206-16, HHS 5204-12, HHS 5202-9
• up to 32 A_rms
• DC - 200 kHz

• Low inductive precision high power shunt
• 1 x 0.25 Ohm / 800 W
• 1 x 1 Ohm / 800 W
• 2 x 0.5 Ohm / 400 W
• Use for many applications including meeting MIL-STD-461 requirements

• Galvanically Isolated Current Sensor
• It can be used to measure currents in case a shunt is not allowed (Ford EMC-CS- 2009), including 1m RG223/U BNC-BNC
• DC – 1 MHz
• 210 VPK / VDC
• -40 A - +40 A

• Compensation Network
• For HHS 5230-100
• up to 8 Arms
• DC - 180 kHz

• Compensation Network
• For HHS 5206-8
• up to 11 Arms
• 80 - 90 kHz (85 kHz)

• Compensation Network
• For HHS 5210-100
• up to 151 Arms
• 50 - 60 Hz 

• Square induction coil
• DC - 10 MHz, 400A Cont. 600A 10min
• up to 1200A/m 5sec with MFPO 9760
• 1-meter square
• turns 1
• Immunity testing to IEC 61000-4-8, IEC 61000-4-9 and IEC 61000-4-10

• Current Transformer for IEC 61000-4-8 AC magnetic fields
• 50 or 60 Hz Feed
• Produce 1000A/m short duration testing (pulse generator)
• up to 400A continuous
• Includes stand for separately sold FESP 5410-1