DUT/EUT Supports & Tables

• The EPS Test Table Lt is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.
• High strength EPS 3lb per ft3
• Low Permittivity >1.04
• Made for moderate 200 lb.
• Options
• vinyl topper with your company logo 
• epoxy coating for the top (can be combined with vinyl)

The EPS Test Table is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.

• High strength EPS 3lb per ft³
• Low Permittivity >1.04
• Made for high loading 500 lb.
• Options
• vinyl topper with your company logo (shown in picture)
• epoxy coating for the top (can be combined with vinyl)

The Wood Test Table is a simple, inexpensive solution for your EMC testing. The table is built to be ship flattened to reduce shipping costs and easily assembled on site quickly. The picture is shown with a ground plane.

The ESD Test Table Kit is a simple inexpensive solution for your ESD testing. Complies to the requirements of IEC 61000-4-2 and can be used for additional standards. Comes with a Horizontal Coupling Plane (HCP), resistive cable to tie HCP to floor ground plane, bleeder wire for discharging ungrounded battery powered EUTs, 0.05mm insulator and an alternative low impedance ground for using the table for additional setups such as IEC 61000-4-6 requirements.

• Low-profile 12'×10' floor plane with matching vertical wall (up to 12'×10') in galvanized steel.
• Staggered two-layer floor design: wide metal-to-metal overlap, ultra-low impedance, almost zero step height.
• Fast install (1–2 days) with full bonding/continuity verification to the building ground or a shielded room.
• Engineered to meet IEC 61000, CISPR, and MIL-STD-461 ground-plane requirements.
• Custom sizes/materials (steel, aluminum, copper), edge ramps, LISN pads, and cable trenches available.
• Delivers repeatable EMC/ESD results by minimizing loop impedance and stray coupling paths.

The original EMC EPS Block is white Expanded Polystyrene can optional be covered in a vinyl covering on top and sides or with a painted coating to extend durability. They come in dimensional metric sizes of 10 x 10 x 5 cm. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. The EMC EPS Block is crush resistance able to withstand heavy weight loads without deforming. 1cm marking on 6 sides allows for easy positioning and test setups. They are conveniently sold in kits in tote bins for secure storage.

• 10 × 10 × 5 cm blocks — Modular dimensions for positioning EUTs and supporting cables.
• Durable PLA construction — Lightweight, 3D-printed blocks designed for repeated laboratory use.
• Stackable, interlocking design — Configure support heights and footprints to suit your setup.
• 1 cm markings on all four sides — Convenient reference points for consistent positioning.
• Integrated hooks and pass-throughs — Secure cables or connect blocks using rubber bands, zip ties, or hook-and-loop straps.
• Crush-resistant construction — Supports equipment while resisting deformation.
• Wipe-clean surfaces — Easy maintenance between tests.
• Plastic tote storage included — Keeps blocks organized and ready for use.
• Purple or green color options — Custom colors available, subject to material availability.

The original EMC EPS 5CM Sheets are white Expanded Polystyrene with 10cm x 10cm indentations for easy measurements. It can be cut down to size with the included razor knife. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for the use in EMC testing for EUT and cable supports. The EMC EPS 5CM SHEETS are crush resistance able to withstand heavy weight loads without deforming. 1cm marking on the top side allows for easy positioning and test setups. Conveniently sold as sheets other sizes possible just ask. 

• Non-Metallic Design: All parts are non-metallic except the antenna connection screw, ensuring minimal interference in EMC testing.
• 3D-Printed PLA & Hardwood Construction: Includes 1" hardwood dowels that are adjustable up to 3 feet; fiberglass dowels are also available.
• Height Adjustability: Ranges from 37" to 68" using a 1-inch center mast.
• Stability: Comes with leveling feet and an optional weight ballast to ensure stability.

The original ABSOLUTE EMC Monopole is specifically designed for the EMC market as a low-cost, easy-to-use solution with no metallic parts except for the antenna connection screw. It's easy to assemble and fully adjustable in height using the center mast section. Made from low permittivity materials, it's ideal for various EMC applications like holding antennas, cameras, RF field probes, and keeping cables off the floor. The monopole's compact design allows for easy maneuverability and reduces tripping hazards compared to tripods. Plus, any plastic pieces that break will be replaced free of charge for the life of the product.

The original EMC EPS Bar is white Expanded Polystyrene can optional be painted coating to extend durability. They come in dimensional metric sizes of 100 x 10 x 5 cm. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. The EMC EPS Bar is crush resistance and able to withstand heavy weight loads without deforming. 1cm marking on 4 sides allows for easy positioning and test setups.

The original EMC EPS 70cm Support is white Expanded Polystyrene. They come in dimensional metric sizes of 40 x 60 x 70 cm. Keep your test setup looking professional with these lightweight and soft EUT supports. Ideal for use in EMC testing for EUT and cable supports. Since the EMC EPS 70cm Support is made from a denser EPS rating, it is crush resistance and able to withstand heavy weight loads without deforming.