Transient Generator

The Wood Test Table is a simple, inexpensive solution for your EMC testing. The table is built to be ship flattened to reduce shipping costs and easily assembled on site quickly. The picture is shown with a ground plane.

The ESD Test Table Kit is a simple inexpensive solution for your ESD testing. Complies to the requirements of IEC 61000-4-2 and can be used for additional standards. Comes with a Horizontal Coupling Plane (HCP), resistive cable to tie HCP to floor ground plane, bleeder wire for discharging ungrounded battery powered EUTs, 0.05mm insulator and an alternative low impedance ground for using the table for additional setups such as IEC 61000-4-6 requirements.

• Test System for MIL-STD-641 CS115, CS116, CS114(option) & CS106(option)
• Automatic calibration for the whole test frequency range
• Application of all test frequencies automatically. The level can be selected or automatic.
• NO need to manually configure the measurement equipment
• NO need to manually integrate the transfer function of probes and attenuators
• Generation of test reports, NO need to record all values read from the measurement equipment
• Generation of calibration reports, NO need to record all calibration setting parameters

ECAT Lightning Test System (L TS) I s a modular test platform which tests the lightning simulator requirements of RTCA DO-160. Sections 22, and 17 The system is expandable to meet MILSTD-461G-CS117, Boeing. Airbus, EUROCAE and other avionic standards.

• Safe / Quick Test Set-up
• Simple user interface
• Waveforms. 1, 2, 3, 4, 5A, 5B, 6, & voltage spikes
• Levels 1, 2, 3, 4, and 5+
• Single Stroke, Multiple Stroke, Multiple Burst and Pin Injections from the same front panel
• Modular architecture
• Voltage spikes