• SCK 105 inBox, Surge Calibration Kit
  • SCK 105 inBox, Surge Calibration Kit
  • SCK 105 inBox, Surge Calibration Kit

SCK 105 inBox, Surge Calibration Kit

The Surge Calibration Kit has been designed to measure the pulse output voltage and the pulse output current of surge generators, e.g. a combination wave generator. It essentially consists of a pulse voltage divider, a pulse current measuring resistor, and a double-shielded coaxial cable. The unit is easy to connect and use for everyday pulse verification.

PARTNER:

MARKETS:

TEST STANDARDS:

Data Sheet

SPECIFICATIONS

 

SURGE CALIBRATION KIT

SCK 105 inBox

 

 

The Surge Calibration Kit has been designed to measure the pulse output voltage and the pulse output current of surge generators, e.g. a combination wave generator. It essentially consists of a pulse voltage divider, a pulse current measuring resistor and a double-shielded coaxial cable.

 

The Broad-band pulse voltage divider, type PVD 10-3 and the pulse current measuring resistor, PSM 10-2 are state-of-the-art measuring equipment whose excellent high-frequency transmission characteristics can be fully exploited only if properly operated and if all aspects typically encountered in the sub-microsecond time region, e.g. appropriate grounding, transmission line characteristics of leads are fully considered.

 

 

 

 

Technical specification

PVD 10-3

 

Input voltage, 1.2 / 50 µs wave form

12 kV max

Input power dissipation

2.5 W

Divider ratio

1000:1 ± 1%

Bandwidth

0 - 10 MHz

Rise time

< 35 ns

 

 

 

 

 

 

Technical specification

PSM 10-2

 

Input current, 8 / 20 µs wave form

10 kA max

Input power dissipation

1.0 W

Measuring Resistance Value

2.0 mW ± 1%

Bandwidth

0 - 10 MHz

Rise time

< 35 ns

 

OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...