PARTNER:
MARKETS:
TEST STANDARDS:
CG118-250CF, 1 - 18 GHz, 250 MHz Steps, Comb GeneratorCheck out our Comb Generator Selection Guide. Features Description The CG118 series Comb Generator is a radiated reference signal source. As a conducted signal source, the output is available directly from the connector. An antenna is supplied with the Comb Generator for generating radiated reference signals. It is a self-contained source of signals consisting of frequency harmonics at 250MHz intervals and is usable from 1GHz up to at least 18GHz. The Comb Generator is powered by a rechargeable internal battery and external power cable connection. When fully charged, the battery allows continuous operation of up to 8 hours. The Comb Generator is included with a battery charger, USB cable, antennas, and accessories are shipped in a wooden storage box. Application The main application of Comb Generator is to quickly verify radiated emissions test setups. And the most important application is troubleshooting Open Area Test Sites(OATS) /chamber. An OATS must be completely calibrated before it is put into service. With the Comb Generator, the test engineer will be able to perform quickly a verification of the conducted test setup more frequently to assure accurate test results. For example, any problem or change with the antenna, attenuator, or receiver will be reflected in the Comb Generator data with the same setup. The same method can be utilized when EMC emissions measurements for a product vary with sites. The Comb Generator can be used to determine if the test sites are causing the variation. Other uses of the Comb Generator include evaluating shielding effectiveness or resonance performance of enclosures for electronic equipment.
Horizontal (1m)Vertical (1m)Field Source Applications
Comb Generator Applications
|