CG01-025, 25 MHz - 6 GHz, 25MHz Steps, Comb Generator
- Frequency Range: 25MHz -6GHz
- Frequency step:25MHz
- Includes antenna, charger, wood case
PARTNER:
MARKETS:
TEST STANDARDS:
Data Sheet
SPECIFICATIONS
CG01-025, 25 MHz - 6 GHz, 25MHz Steps, Comb GeneratorCheck out our Comb Generator Selection Guide. Features Description The CG01 series Comb Generator is a radiated reference signal source. As a conducted signal source, the output is available directly from the connector. An antenna is supplied with the Comb Generator for generating radiated reference signals. It is a self-contained source of signals consisting of frequency harmonics at 25 MHz intervals and is usable from 25MHz up to at least 6GHz. The Comb Generator is powered by a rechargeable internal battery and external power cable connection. When fully charged, the battery allows continuous operation of up to 16 hours. The Comb Generator is included with a battery charger, USB cable, antennas, and accessories are shipped in a wooden storage box. Application The main application of Comb Generator is to quickly verify radiated emissions test setups. And the most important application is troubleshooting Open Area Test Sites(OATS) /chamber. An OATS must be completely calibrated before it is put into service. With the Comb Generator, the test engineer will be able to perform quickly a verification of the radiated test setup more frequently to assure accurate test results. For example, any problem or change with the antenna, attenuator, or receiver will be reflected in the Comb Generator data with the same setup. The same method can be utilized when EMC emissions measurements for a product vary with sites. The Comb Generator can be used to determine if the test sites are causing the variation. Other uses of the Comb Generator include evaluating shielding effectiveness or resonance performance of enclosures for electronic equipment.
Vertical |
OTHER PRODUCTS IN THE SAME CATEGORY:
CG 50/500, 50 kHz - 30 MHz, 50 and 500 kHz Steps, Conducted Comb Generator
CG01-5/10, 5 MHz - 1 GHz, 5 & 10 MHz Steps, Comb Generator
CG 10L/510R, 10 kHz - 1 GHz, 10/500kHz 5/10MHz Steps, Conducted & Radiated Comb Generator
CG01-025, 25 MHz - 6 GHz, 25MHz Steps, Comb Generator
CG140-1000C, 1 GHz - 40 GHz, 1 GHz Steps, Comb Generator
CG126-250C, 250 MHz - 26.5 (40) GHz, 250 MHz Steps, Comb Generator
CG118-250CF, 1 GHz - 18 GHz, 250 MHz Steps, Comb Generator
CG 100/500, 100 kHz - 400 MHz, 100 and 500 kHz Steps, Conducted Comb Generator
CG 50/500R, 50kHz - 30MHz, 500kHz Step, Comb Generator
CG08-100R, 100 MHz - 7.5 GHz, 100MHz Step, Comb Generator
CG08-10/100R, 10 MHz - 8 GHz, 10 & 100MHz Step, Comb Generator
CG118-100CF, 100 MHz - 18 GHz, 100 MHz Steps, Comb Generator
CG 10/500, 10 kHz - 30 MHz, 10 and 500 kHz Steps, Conducted Comb Generator
CG 50L/510R, 50 kHz - 1 GHz, 50/500kHz & 5/10MHz Steps, Conducted & Radiated Comb Generator
CG01-5, 5 MHz - 1 GHz, 5 MHz Steps, Comb Generator
CG01-10, 10 MHz - 1 GHz, 10 MHz Steps, Comb Generator
CG 50LR10100R, 50kHz/500kHz - 108MHz for LISN & 10MHz ~6GHz for RE, Comb Generator
IGUF 2910 S, High Power Pulse Generator
SG 9301, 1-1000MHz Comb Generator
