Absolute EMC offers an assortment of injection test kits for the use of conducted immunity. The kits can be used with many available conducted immunity systems, including the Schlöder CDG 7000, to make selection and setup easy. All calibration fixtures, injection clamps, attenuators, and termination resistors necessary for meeting the requirements of conducted immunity systems. All all-in-one systems are covered.
ICK Cover testing to the following:
- Commercial product: IEC 61000-4-6 Conducted immunity to RF fields
- Military Products: MIL-STD-461 CS114 BCI rf immunity
- Commercial Avionics: DO-160 Section 21 Immunity to rf BCI method
- Automotive Products: ISO 11452-4 BCI, closed-loop, and substitution methods
Model |
Application |
Included in package |
ICK EM20-IEC
EM Clamp method for cable bundles up to 20mm
|
IEC 61000-4-6, IEC 61000-6-2, IEC 61000-6-1, CISPR 14 IEC 61326-1 |
EM Clamp, 10 kHz – 1 GHz, 100 watts, 20mm Cable diameter, N(f) EM Clamp Calibration fixture: brackets, 4mm rod, x2 150 Ω to 50 Ω adaptor, BNC, x2· 50 Ω Termination, 4GHz, BNC, 1 watt Clamp on Current Monitor Clamp SM, 10 kHz - 400 MHz, BNC(f) 6dB Attenuator, 100 watts, DC-6 GHz, N(f)-N(m) (in-out) 10dB Attenuator, 25 Watts, DC-18GHz, N(f)-N(m), bi-directional 20dB Attenuator, 25 Watts, DC-18GHz, N(f)-N(m) , bi-directional Coax Cable: BNC(m)-BNC(m), 2m, shielded, x2 Coax Cable: N(m)-N(m), 2m, shielded Adaptors: N(m)-BNC(f), N(f)-BNC(m) |
ICK EM20-IEC-A |
|
Same as ICK EM20-IEC with the addition of Absorbing clamp 20mm Cable diameter |
ICK EM35-IEC
EM Clamp method for cable bundles up to 35mm
|
IEC 61000-4-6, IEC 61000-6-2, IEC 61000-6-1, CISPR 14 IEC 61326-1 |
EM Clamp, 10 kHz – 1 GHz, 100 watts, 35mm Cable diameter, N (f) EM Clamp Calibration fixture: brackets, 4mm rod, x2 150 Ω to 50 Ω adaptor, BNC, x2 50 Ω Termination, 4GHz, BNC, 1 watt lamp on Current Monitor Clamp, 10 kHz - 400 MHz, N(f) 6dB Attenuator, 100 watts, DC-6 GHz, N(f)-N(m) (in-out) 10dB Attenuator, 25 Watts, DC-18GHz, N(f)-N(m), bi-directional 20dB Attenuator, 25 Watts, DC-18GHz, N(f)-N(m) , bi-directional Coax Cable: BNC(m)-BNC(m), 2m, shielded, x2 Coax Cable: N(m)-N(m), 2m, shielded Adaptors: N(m)-BNC(f), N(f)-BNC(m) |
ICK EM35-IEC-A |
|
Same as ICK EM35-IEC with the addition of Absorbing clamp 35mm Cable diameter |
ICK BCI-IEC
BCI method for cable bundles up to 50mm *EM Clamp is the preferred method, BCI is inefficient in comparison taking much more power to reach levels
|
IEC 61000-4-6, IEC 61000-6-2, IEC 61000-6-1, CISPR 14 IEC 61326-1 |
BCI Probe, 10 kHz – 400 MHz, 100 Watts, 50mm(2”) cable diameter, N(f) Calibration fixture for BCI Clamp & Current Monitor Clamp 150 Ω to 50 Ω adaptor, BNC, x2 50 Ω Termination, 4GHz, BNC, 2watt Clamp-on Current Monitor Clamp, 10 kHz - 400 MHz, N(f) 6dB Attenuator, 100 watts, DC-6 GHz, N(f)-N(m) (in-out) 10dB Attenuator, 25 Watts, DC-18GHz, N(f)-N(m), bi-directional 20dB Attenuator, 25 Watts, DC-18GHz, N(f)-N(m) , bi-directional Coax Cable: BNC(m)-BNC(m), 2m, shielded, x2 Coax Cable: N(m)-N(m), 2m, shielded Adaptors: N(m)-BNC(f) x3 |
ICK BCI-MIL-DO
BCI method for cable bundles up to 50mm(note this setup can be used for ISO BCI)
|
MIL-STD-461, DO-160, IEC 61000-4-6 |
BCI Probe, 10 kHz – 400 MHz, 100 Watts, 50mm(2”) cable diameter, N(f) Clamp-on Current Monitor Clamp, 10 kHz - 400 MHz, N(f) Calibration fixture for BCI Clamp & Current Monitor Clamp 50 Ω Termination, N(m), 3GHz, 25 watts 3dB Attenuator, 100 watts, DC-6 GHz, N(f)-N(m) (in-out) 6dB Attenuator, 100 watts, DC-6 GHz, N(f)-N(m) (in-out) 10dB Attenuator, 25 Watts, DC-18GHz, N(f)-N(m), bi-directional 20dB Attenuator, 25 Watts, DC-18GHz, N(f)-N(m) , bi-directional Coax Cable: BNC(m)-BNC(m), 2m, shielded, x2 Coax Cable: N(m)-N(m), 2m, shielded, x2 Adaptors: N(m)-BNC(f) x3 |
ICK BCI-ISO
BCI: Closed-loop or substitution Methods for cable bundles up to 50mm
|
ISO 11452-4, Ford, GM, FCA, VW, Daimler, Toyota, Honda, Tesla, … |
BCI Probe, 10 kHz – 400 MHz, 100 Watts, 50mm(2”) cable diameter, N(f) Clamp on Current Monitor Clamp, 10 kHz - 400 MHz, N(f) Calibration fixture for BCI Clamp & Current Monitor Clamp 50 Ω Termination, N(m), 3GHz, 25 watts 3dB Attenuator, 100 watts, DC-6 GHz, N(f)-N(m) (in-out) 6dB Attenuator, 100 watts, DC-6 GHz, N(f)-N(m) (in-out) 10dB Attenuator, 25 Watts, DC-18GHz, N(f)-N(m), bi-directional 20dB Attenuator, 25 Watts, DC-18GHz, N(f)-N(m) , bi-directional Coax Cable: BNC(m)-BNC(m), 2m, shielded, x2 Coax Cable: N(m)-N(m), 2m, shielded, x2 Adaptors: N(m)-BNC(f) x3 |
|
|
|
|