Support arm with balancer for ESD test station

• The only support arm is made from non-metal 
• 1.5" Fiberglass Tubes,
• 3D Printed: Cage, holder, base
• Custom ESD simulator adaption
• Balancer is plastic housing and string (only the spring is metallic)
• Only the system meets the metal-free area requirements of standards
• Support arm with the carriage
• 360 degrees pivotable
• Customized attachment to the table included

An 8 kV ESD simulator for contact and air discharge testing, with a built-in camera and a 3.5-inch color touchscreen. See the discharge point live and save images before and after an impulse to support test documentation.

The portable ESD gun includes a 150 pF / 330 ohm RC network, two rechargeable battery packs and USB-C charging. Increase the voltage capability later with a purchased unlock code for a higher-voltage ONYX VISION configuration.

An 16 kV ESD simulator for contact and air discharge immunity testing. Its integrated 1.5-megapixel camera displays the test point on a 3.5-inch color touchscreen and saves photographs before and after an impulse.

Includes a 150 pF / 330 ohm RC network, two rechargeable batteries and USB-C charging. Upgrade to 30 kV later with a purchased unlock code.

A 30 kV ESD simulator for contact and air discharge immunity testing. Its integrated 1.5-megapixel camera displays the test point on a 3.5-inch color touchscreen and saves photographs before and after an impulse.

Includes a 150 pF / 330 ohm RC network, two rechargeable batteries and USB-C charging. The 30 kV model provides the highest listed family voltage; lower-voltage models can be upgraded with a purchased unlock code.

Onyx 16

• +/- 16.5kV air and Contact Discharge
• 150pF/330Ohm Standard, Other networks available
• >16 hour Battery life, AC mains option
• Optional Software

Onyx 30

• +/- 30kV air and Contact Discharge
• 150pF/330Ohm Standard, Other networks available
• >16 hour Battery life, AC mains option
• Optional Software

ESD Simulator Stand

• Easily and safely put the ONYX 16 or 30 ESD simulator in an upright position
• 2 holders for Air Discharge & Contact Discharge Tips when not in use
• Firmly holds the base and will not allow the simulator to tip. 
• Easy grab-and-go