EMSCOPE-RX2, 9kHz - 110MHz, 2 channel Receiver
EMSCOPE-RX4, 9kHz - 110MHz, 4 channel Receiver for 3 phase
AB-Precompliant Test Kits
HFa-1S, 16 Amp single phase Harmonics and Flicker
HFa-1-16-Ref, 16 Amp single phase Harmonics and Flicker w/ Impedance Reference
HFa-3-16, 16 Amp 3-phase Harmonics and Flicker
HFa-3-16-Ref, 16 Amp 3-phase Harmonics and Flicker w/Reference Impedance
HFa-3-35-Ref, 35 Amp 3-phase Harmonics and Flicker w/Reference Impedance
HFa-3-75-500-Ref, 75 Amp 3-phase Harmonics and Flicker w/Reference Impedance
TBMR-110M DC - 110 MHz high speed EMI-Analyzer
Products
EMSCOPE, 9kHz - 110MHz, 2 channel Receiver/LISN
EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak, and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
EMSCOPE-RX2, 9kHz - 110MHz, 2 channel Receiver
EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak, and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
EMSCOPE-RX4, 9kHz - 110MHz, 4 channel Receiver for 3 phase
EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak, and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
- Measure 4 lines of 3 phase LISN
- The picture is shown with internal LISN [EMSCOPE RX4 LZ2]
AB-Precompliant Test Kits
Absolute EMC has designed low-cost pre-compliance systems to meet a wide range of RF emissions and immunity needs. Some form of pre-complaint testing is a must for any company that needs to demonstrate their product for EMC compliance. This enables companies to be responsive when issues happen and to also be proactive before going to the lab to better your chances of passing the first time.
HFa-1S, 16 Amp single phase Harmonics and Flicker
- Full compliant system meeting the requirements
- IEC 61000-3-2 Harmoinc Emissions
- IEC 61000-3-3 Flicker Emissons
- USB controlled, Windows 10 compatible software included
- 16 Amp, 120, and 230 Voltages, 50/60Hz
HFa-1-16-Ref, 16 Amp single phase Harmonics and Flicker w/ Impedance Reference
- Full compliant system meeting the requirements
- IEC 61000-3-2 Harmoinc Emissions
- IEC 61000-3-3 Flicker Emissons
- USB controlled, Windows 10 compatible software included
- 16 Amp, 120, and 230 Voltages, 50/60Hz
HFa-3-16, 16 Amp 3-phase Harmonics and Flicker
- Full compliant system meeting the requirements
- IEC 61000-3-2 Harmoinc Emissions
- IEC 61000-3-3 Flicker Emissions
- USB controlled, Windows 10 compatible software included
- Singel and 3 phase 16 Amp, 120 and 230 Voltages, 50/60Hz
HFa-3-16-Ref, 16 Amp 3-phase Harmonics and Flicker w/Reference Impedance
- Full compliant system meeting the requirements
- IEC 61000-3-2 Harmoinc Emissions
- IEC 61000-3-3 Flicker Emissions
- USB controlled, Windows 10 compatible software included
- Singel and 3 phase 16 Amp, 120 and 230 Voltages, 50/60Hz
- Includes Refernec impedance
HFa-3-35-Ref, 35 Amp 3-phase Harmonics and Flicker w/Reference Impedance
- Full compliant system meeting the requirements
- IEC 61000-3-2 & IEC 61000-3-12 Harmoinc Emissions
- IEC 61000-3-3 & IEC 61000-3-11 Flicker Emissions
- USB controlled, Windows 10 compatible software included
- Singel and 3 phase 35 Amp, 120 and 230 Voltages, 50/60Hz
- Includes Reference Impedance
HFa-3-75-500-Ref, 75 Amp 3-phase Harmonics and Flicker w/Reference Impedance
- Full compliant system meeting the requirements
- IEC 61000-3-2 & IEC 61000-3-12 Harmoinc Emissions
- IEC 61000-3-3 & IEC 61000-3-11 Flicker Emissions
- USB controlled, Windows 10 compatible software included
- Singel and 3 phase 16 Amp, 120 and 230 Voltages, 50/60Hz
- Includes Refernec impedance
TBMR-110M DC - 110 MHz high speed EMI-Analyzer
The TBMR-110M EMI Analyzer is designed to carry out conducted emission measurements. Its affordability and versatility make it a perfect tool for engineers doing pre-compliance measurements during the development process.
- True DC – 110 MHz measurement range
- CISPR-16, ANSI and MIL-STD compliant detectors
- Peak, Quasi-Peak, Average, CISPR Average, RMS and CISPR RMS dectectors working in parallel
- Zero Span operation with time domain triggering
- Linear, log amplitude and frequency display
