The double telescopic antenna mast/tripod is continuously height-adjustable. The mast rods are made of glass fiber to avoid unwanted reflexions. The modular design makes it possible to use different telescope parts and it can be mounted on a mast foot made of stainless steel or one made out of low-reflective fiberglass. Both of them provide a secure stand and easy adjustment on uneven ground. Antennas or adapters can be mounted on the 3/8" male thread.
The polarisation swivel fixture PDG 9211 allows changing the polarisation of larger horn antennas by a single person easily. With the four locking points, the antenna can snap in increments of 90° angles to horizontal or vertical polarisation.
Mast Adapter for Antenna Mast System AM 9144 with 22 mm hole for most Antenna models.
Indexing adapter RA 9215 for fast and precise polarisation change (90° steps)
Pneumatic polarisation shifter with a 2-way pneumatic cylinder for all Schwarzbeck antennas with a 22 mm tube on AM 9144. Compressed air required.
The Antenna Hinge Joint is a device made of high-grade insulating material to change the polarisation of large preferably double-boom antennas such as LOG-PER models.
Positioner for lightweight antennas like SBA 9113 with 420 NJ. The positioner consists of 1 piece of glass fiber tube 22 mm thick, 1000 mm long, an adapter AA 9203 is mounted to the tube. The other end of the tube carries a 3/8 inch male camera thread.
Adapter for Schwarzbeck antennas with 22 mm tube on EMCO mast.
Swivel handle for light antennas
A non-metallic mast adapter for most lightweight Antenna models with 22 mm tube minimizes reflections
Adapter to convert a 3/8" female thread to 22 mm tube e.g. to fix BBHA 9170 on AM 9104.
Antenna adapter to fix STLP 9128 E, STLP 9128 E special, STLP 9128 D, STLP 9128 D special on AM 9144.