TBL05100-1C 5uH Line Impedance Stabilization Network
5uH Line Impedance Stabilization Network
Configurable, high-current 5 µH LISN for automotive, military and aviation conducted measurements.
- Supported standards: CISPR 16-1-2, CISPR 25, MIL-STD-461G, DO-160, ISO11452-4 and ISO 7637-2
- Characterized frequency range: 10 kHz – 400 MHz
- DC Resistance: < 5 mOHM Source+ to EUT+; < 5 m? Source- to EUT
- Maximum current: 100A; see plot with heat up characteristics, chapter 8
- Maximum operating voltage range: 0 – 500V AC @50/60 Hz, 250V AC @ 400Hz, 1000V DC
TBL05100-1C Technical Document
SPECIFICATIONS
TBL05100-1C 5uH Line Impedance Stabilization Network
Configurable, high-current 5 µH LISN for automotive, military and aviation conducted measurements.
Technical specifications
| Supported standards | CISPR 16-1-2, CISPR 25, MIL-STD-461G, DO-160, ISO11452-4 and ISO 7637-2 |
| Characterized frequency range | 10 kHz – 400 MHz |
| DC Resistance | < 5 mOHM Source+ to EUT+; < 5 mOHM Source- to EUT |
| Maximum current | 100A; see plot with heat up characteristics, chapter 8 |
| Maximum operating voltage range | 0 – 500V AC @50/60 Hz, 250V AC @ 400Hz, 1000V DC |
| Absolute maximum rating of internal components | 1500V DC |
| RF connector | N-Female |
| EUT connector | binding post M8, 4mm center hole, 100A, 1kV, Schützinger POL 102 L / RT |
| SOURCE connector | binding post M8, 4mm center hole, 100A, 1kV, Schützinger POL 102 L / RT EARTH: 8 mm |
| Earth stud with wing-nut, exposed stainless steel bottom panel with mounting slots and countersunk hole for 4mm screw | |
| Jumper | Harwin D3087-98 |
| Dimensions | 300 mm x 150 mm x 150 mm |
| Weight | 2.7 kg |
OTHER PRODUCTS IN THE SAME CATEGORY:
CABCISPR2515A, CISPR 25, 5uH, 15 A LISN
Cx 10000-xxx-xxx, 1000V, 100 - 600 amp 10mF HV Capacitor Cabinet
NNBM 8124, 10 kHz - 150(400) MHz, High Voltage, 70A, single path, 5µH LISN
NNBM 8124-800, 0.1 - 150 MHz, High Voltage, 800A, single path, Automotive LISN
NNBM 8124-400, 0.1 - 150 MHz, High Voltage, 400A, single path, Automotive LISN
NNBM 8124-200, 0.1 - 150 MHz, High Voltage, 200A, single path, Automotive LISN
NNHV 8123-1600, 0.1 - 150 MHz, High Voltage, 1600A, single path, Automotive LISN
BAN 8508, BAN 8530, DC-Block 500 for testing to ISO 11452-7 or DC-10614
CMDM 8700 D Common mode / Differential mode switch
NNHV 8123, 0.1 - 150 MHz, High Voltage, 70A, single path, Automotive LISN
NNHV 8123-200, 0.1 - 150 MHz, High Voltage, 200A, single path, Automotive LISN
NNHV 8123-400, 0.1 - 150 MHz, High Voltage, 400A, single path, Automotive LISN
NNHV 8123-400R, 0.1 - 150 MHz, High Voltage, 400A, single path, Automotive LISN
NNHV 8123-800, 0.1 - 150 MHz, High Voltage, 800A, single path, Automotive LISN
HVSE 8601, 800A Shielded Enclosure for Automotive LISN
VTSD 9561 D, 20dB, Diode Pulse Limiter
VTSD 9561 F, 10dB, Diode Pulse Limiter
HVSE 8600, Shielded Enclosure for Automotive LISN
CAP 0.9-400, 0.9 µF capacitor for NNHV 8123-400/-800
