CAP 0.9-400, 0.9 µF capacitor for NNHV 8123-400/-800

In order to be compliant to the standards ECE R10.06, CISPR 12 and PSA (which require a capacitance of in total 1 uF parallel to a resistance of 1 MΩ at the input side of the LISN) a 0.9 μF capacitor like the CAP 0.9-400 has to be connected to the mains terminals of the NNHV 8123-400 or NNHV 8123-800 LISN.

MARKETS:

Data Sheet

SPECIFICATIONS

 

CAP 0.9-400, 0.9 μF capacitor for NNHV 8123-400/-800


In order to be compliant to the standards ECE R10.06, CISPR 12 and PSA (which require a capacitance of in total 1 uF parallel to a resistance of 1 MΩ at the input side of the LISN) a 0.9 μF capacitor like the CAP 0.9-400 has to be connected to the mains terminals of the NNHV 8123-400 or NNHV 8123-800 LISN.

 

 

Specifications:  
Capacity: 0.9 µF ±10%
Dielectric strength: 1000 VDC 650 VAC (50…890 Hz)
Max. current: 6 A
Distance wing terminals: 110 mm
Dimensions: 150 x 88 x 40 mm
Ambient temperature: -25° … +60°C
Weight: 300 g
According to standards: ECE R10.06, CISPR 12, PSA

 

Instructions for use:

The capacitor CAP 0.9-400 has to be connected to the mains wing terminals at the rear panel of the NNHV 8123-400 or NNHV 8123-800 LISN. The allowed maximum values of the LISN as well as of the CAP 0.9-400 must not be exceeded.

Note:

The LISN has to be connected to protective earth before connecting any mains to it. Only trained personnel may use this equipment.

 

 

OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...