TekBox TBCP5-150K400 Snap-On RF Current Monitoring Probe

Snap-On RF Current Monitoring Probe

150 kHz–400 MHz typical 3 dB bandwidth; characterized 10 Hz–500 MHz
200 A maximum bias current from DC to 400 Hz; 2 A maximum primary RF current
11 dBΩ typical transfer impedance in the flat region
46 mm aperture; 50 Ω N-female output
Less than 400 mΩ insertion impedance through 400 MHz; less than 1 pF shunt capacitance with a concentric 10 mm cable

PARTNER:

TEKBOX DIGITAL SOLUTIONS VIETNAM CO. LTD.

MARKETS:

CATEGORIES:

TEST STANDARDS:

FMC1278 ,

Cal Fixture Manual

TBCP5-150K400 Manual

SPECIFICATIONS

TBCP5-150K400 Snap-On RF Current Monitoring Probe

Clamp around a conductor to measure RF current in the presence of substantial DC or low-frequency bias. The 200 A bias rating and the 2 A RF current limit describe different conditions. TBCP5-CAL is the optional calibration fixture. TekBox also lists TBFL1 and TBAS3 as receiver protection accessories.

Technical specifications

150 kHz–400 MHz typical 3 dB bandwidth; characterized 10 Hz–500 MHz
200 A maximum bias current from DC to 400 Hz; 2 A maximum primary RF current
11 dBΩ typical transfer impedance in the flat region
46 mm aperture; 50 Ω N-female output
Less than 400 mΩ insertion impedance through 400 MHz; less than 1 pF shunt capacitance with a concentric 10 mm cable
125 °C maximum core temperature; 124 mm diameter × 36 mm high; 320 g

OTHER PRODUCTS IN THE SAME CATEGORY: