Automotive BCI Testing - CDN BCI-P1 MT-1 Bulk Current Injection Probe with matching network

CDN BCI-P1_MT-1 Bulk Current Injection Probe 4 kHz – 400 MHz

Gallery CDN BCI-P1_MT-1 Bulk Current Injection Probe 4 kHz – 400 MHz

CDN BCI-P1_MT-1 Bulk Current Injection Probe 4 kHz – 400 MHz

CDN BCI-P1_MT-1 Bulk Current Injection Probe 4 kHz – 400 MHz - Meets specifications of ISO 11452-4:2005, MIL-STD-461, DO-160 and IEC 61000-4-6 - Frequency range from 4 kHz up to 400 MHz - Designed for BCI testing

PARTNER:

SCHLöDER GMBH

MARKETS:

TEST STANDARDS:

Data Sheet

SPECIFICATIONS

CDN BCI-P1_MT-1

Bulk Current Injection Probe 4 kHz – 400 MHz

Meets specifications of ISO 11452-4:2005, IEC 61000-4-6, and many more
Frequency range from 4 kHz up to 400 MHz
Designed for BCI testing
With the use of the matching network, a single BCI probe meets many requirements
Low insertion loss

The Bulk Current Injection Probe is used to inject RF-current into cables of electrical equipment to test the susceptibility against radiated electromagnetic energy.

It was designed to meet the specifications of ISO 11452-5:2005 and IEC 61000-4-6 standards for automotive BCI testing with secondary currents of 300 mA and more.

The probe can be easily clamped around test conductors and supports cable harness diameters up to 40 mm diameter.

Clamp Specifications
Frequency range	4 kHz – 400 MHz
Input Connector	Type N Female
Inner diameter	40 mm
Outer Diameter	120 mm
Width	40 mm
Max. core temperature	90 °C
Turns Ratio	1:1
Primary inductance	5.1 µH @ 100 kHz
Ambient temperature	0 to 40 °C
Fastening	1 Clip
Input Power rating until core temperature is 90 °C	90 min @ 70 W (48.45 dBm)45 min @ 100 W (50 dBm)
CDN BCI-P1_MT-1
Frequency	Winding Ratio
4 … 20,7 kHz	1:16
20,7 … 82,1 kHz	1:8
82,1 … 340 kHz	1:4
340 kHz … 1,17 MHz	1:2
1,17 … 400 MHz	direct
Connectors
Generator	N-connector, 50 Ohm (max. input power: 100W / 500 W direct mode)
Clamp	N-connector, 50 Ohm
USB	emulated COM port with 9600 Baud, 8 data bits, 1 stop bit, no parity
LAN	RJ45 jack
Power	2.1 mm x 5.5 mm socket (+ inside), 24 V DC / 0.5 A