AB-Precompliant Test Kits

AB-Precompliant Test Kits

EMScanner: 150 kHz- 8 GHz, 3.5mm Resolution,  EMC desktop scanner

EMScanner: 150 kHz- 8 GHz, 3.5mm Resolution, EMC desktop scanner

EMScannerR: 150 kHz- 8 GHz, 0.06mm resolution, EMC desktop scanner

EMScannerR: 150 kHz- 8 GHz, 0.06mm resolution, EMC desktop scanner

EMProbe: 9kHz- 18 GHz, 0.2mm resolution, EMC robotic scanner

EMProbe: 9kHz- 18 GHz, 0.2mm resolution, EMC robotic scanner

NFPKIT, EM Near Field Probe Kit w/Camera & Software

NFPKIT, EM Near Field Probe Kit w/Camera & Software

RFScanner, Antenna Pattern measurement, 300MHz - 6 GHz

RFScanner, Antenna Pattern measurement, 300MHz - 6 GHz

EMScannerR+: 150 kHz- 6 GHz, w/ Real-Time Spectrum Analyzer, EMC desktop scanner

EMScannerR+: 150 kHz- 6 GHz, w/ Real-Time Spectrum Analyzer, EMC desktop scanner

EMScanner+: 150 kHz- 6 GHz, w/ Real-Time Spectrum Analyzer, EMC desktop scanner

EMScanner+: 150 kHz- 6 GHz, w/ Real-Time Spectrum Analyzer, EMC desktop scanner

EMProbe-DBM-E6 — 6-Axis Robotic Near-Field EMI Diagnostics on the Bench

EMProbe-DBM-E6 — 6-Axis Robotic Near-Field EMI Diagnostics on the Bench

EMProbe CR5 - Custom Large-Reach Robotic EMI Scanning System

EMProbe CR5 - Custom Large-Reach Robotic EMI Scanning System

MGA 1033; Magnetic Immunity DC-250 kHz, 800 Watts

MGA 1033; Magnetic Immunity DC-250 kHz, 800 Watts

TBMR-110M DC - 110 MHz high speed EMI-Analyzer

TBMR-110M DC - 110 MHz high speed EMI-Analyzer

Products

AB-Precompliant Test Kits

Absolute EMC has designed low-cost pre-compliance systems to meet a wide range of RF emissions and immunity needs. Some form of pre-complaint testing is a must for any company that needs to demonstrate their product for EMC compliance.  This enables companies to be responsive when issues happen and to also be proactive before going to the lab to better your chances of passing the first time. 

EMScanner: 150 kHz- 8 GHz, 3.5mm Resolution, EMC desktop scanner

150 kHz to 8 GHz | External spectrum analyzer | 1,218-probe array

EMScanner helps engineers locate and compare PCB emission sources across a 316 x 218 mm scan area. A fixed array of 1,218 magnetic-field probes gives fast coverage, with 7.5 mm physical spacing and a manufacturer-stated 3.75 mm effective resolution. Use it with a compatible external spectrum analyzer and a PC running EMViewer.

EMScannerR: 150 kHz- 8 GHz, 0.06mm resolution, EMC desktop scanner

150 kHz to 8 GHz | External spectrum analyzer | Down to 0.06 mm

EMScannerR helps engineers locate and compare PCB emission sources across a 316 x 218 mm scan area. Its eight selectable resolution levels run from 7.5 mm down to 0.06 mm for detailed investigation of dense boards. Use it with a compatible external spectrum analyzer and a PC running EMViewer.

EMProbe: 9kHz- 18 GHz, 0.2mm resolution, EMC robotic scanner

Component-side scanning | Adjustable probe height | External analyzer

EMProbe automates a handheld near-field probe over the component side of a PCB or around a non-flat assembly. Program scan height and position in EMViewer, then acquire RF measurements with a compatible external spectrum analyzer. The compact arm is suited to repeatable bench investigations, with larger arm or extension configurations available for application-specific work.

NFPKIT, EM Near Field Probe Kit w/Camera & Software

5 E/H-field probes | Camera tracking | Live EMI visualization

NFP Kit adds camera-based position tracking to handheld near-field measurements. EMViewer recognizes the probe and measurement location from visible markers, helping engineers map emission sources while moving the probe by hand. The kit combines five electric/magnetic probes, a camera, mounting arm and measurement software with your compatible spectrum analyzer.

RFScanner, Antenna Pattern measurement, 300MHz - 6 GHz

  • Frequency Range of 300 MHz to 6.0 GHz
  • Far-Field Patterns and Bisections, including EIRP / TRP / PRD, Circular and linear polarization, and axial ratio patterns
  • Near-field insights such as Amplitude and Phase distribution are available in  seconds
  • Gain, Efficiency, and S11 chart with Supported VNAs
  • “Real-time” real-fast
  • Can be used to evaluate either standalone (i.e. passive) antennas or antennas that are embedded in wireless devices (i.e. active antennas). 
  • Simple set up and Easy to use

EMScannerR+: 150 kHz- 6 GHz, w/ Real-Time Spectrum Analyzer, EMC desktop scanner

150 kHz to 6 GHz | Internal spectrum analyzer | Down to 0.06 mm

EMScannerR+ helps engineers locate and compare PCB emission sources across a 316 x 218 mm scan area. Its eight selectable resolution levels run from 7.5 mm down to 0.06 mm for detailed investigation of dense boards. The internal spectrum analyzer simplifies the measurement setup; a user PC runs EMViewer.

EMScanner+: 150 kHz- 6 GHz, w/ Real-Time Spectrum Analyzer, EMC desktop scanner

150 kHz to 6 GHz | Internal spectrum analyzer | 1,218-probe array

EMScanner+ helps engineers locate and compare PCB emission sources across a 316 x 218 mm scan area. A fixed array of 1,218 magnetic-field probes gives fast coverage, with 7.5 mm physical spacing and a manufacturer-stated 3.75 mm effective resolution. The internal spectrum analyzer simplifies the measurement setup; a user PC runs EMViewer.

EMProbe-DBM-E6 — 6-Axis Robotic Near-Field EMI Diagnostics on the Bench

6 axes | 450 mm radius | 0.01 mm positioning repeatability

EMProbe DBM E6 combines a six-axis robotic arm, near-field probes and EMViewer for repeatable component-side EMI investigations. The dedicated E6 datasheet specifies a 450 mm scan radius, scan spacing down to 0.1 mm and 0.01 mm positioning repeatability. Select the probe and compatible external analyzer to match the emissions and geometry being investigated.

EMProbe CR5 - Custom Large-Reach Robotic EMI Scanning System

Custom configuration | 6-axis robot | 900 mm working-radius example

EMProbe CR5 is a custom near-field scanning solution for larger DUTs and applications that need more reach than a compact bench arm. It combines a six-axis collaborative robot, application-specific probe mounting and EMViewer scan control with a compatible external spectrum analyzer. Each system is configured around the DUT geometry, probe selection, workspace and measurement objectives. Request a quotation for your application.

MGA 1033; Magnetic Immunity DC-250 kHz, 800 Watts

The compact magnetic field generator and analyzer MGA 1033 allows susceptibility tests against magnetic fields from DC to 250 kHz according to the standard EN 55103-2 and their measurement according to EN 55103-1. In addition, EMC tests are possible according to various standards such as automotive, avionic and MIL-STD.; Generation of magnetic fields from DC to 250 kHz; Field strength up to 1000 A/m; EN 55103-1/2, MIL-STD 461, Automotive etc.; Accessories: Loop sensors, Helmholtz coils etc.;

TBMR-110M DC - 110 MHz high speed EMI-Analyzer

The TBMR-110M EMI Analyzer is designed to carry out conducted emission measurements. Its affordability and versatility make it a perfect tool for engineers doing pre-compliance measurements during the development process.
  • True DC – 110 MHz measurement range
  • CISPR-16, ANSI and MIL-STD compliant detectors
  • Peak, Quasi-Peak, Average, CISPR Average, RMS and CISPR RMS dectectors working in parallel
  • Zero Span operation with time domain triggering
  • Linear, log amplitude and frequency display


Loading...