FSE3D Isotropic E-Field Handheld Antenna

  • Isotropic E-Field Antenna for the handheld spectrum analyzer
  • Frequency range: (10) 30 MHz - 3 (3.3) GHz
  • Light weight low attenuation radom
  • Outer diameter approx. 150 mm

MARKETS:

TEST STANDARDS:

Data Sheet

SPECIFICATIONS

 

FSE3D  Handheld Electric field meter

 

  • Isotropic E-Field Antenna for the handheld spectrum analyzer
  • Frequency range: (10) 30 MHz - 3 (3.3) GHz
  • Lightweight low attenuation radome
  • Outer diameter approx. 150 mm

The FSE3D consists of three identical, active broadband dipoles, which are aligned perpendicularly to each other. A shielded unit follows, containing the switching and amplifier circuitry, which is directly connected to the N-male output and fed by the USB-connector with power supply and data-signals to select the desired loop-axis. An RF-transparent radome cover protects the FSE3D from dust and moisture. Because of its light-weight construction, the FSE3D can be directly mounted to the spectrum analyzer. Alternatively, the FSE3D can be held manually at its 50 mm shaft (sweeping method) or attached to a mast or tripod using the 22 mm tube (rotation method or raster method).

 

Specifications:  
Frequency Range (nominal): 30 MHz - 3.0 GHz
Frequency Range (useable): 10 MHz - 3.3 GHz
Coaxial Connector: N (m)
Power Supply: 5 V DC < 100 mA
Power Supply and ControlConnector: Binder 99-0421-10-07 Series  712 (Andere Stecker erhältlich/ other connectors available)
Antenna Factor for E-Field strength: 26...33 dB/m
VSWR: typ. 1.3…1.7
Decoupling of the axis: typ.  20 dB
1 dB Compression: 30 MHz: 142.5 dBµV/m300 MHz: 141.0 dBµV/m
Dimensions: 550 x 146 x 146 mm
Weight: 820 g
Environmental Conditions: -10°C - +50°C, IP54

 

 

OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...