FSH3D Isotropic H-Field Handheld Antenna

  • Isotropic H-Field Antenna
  • Rohde und Schwarz handheld spectrum analyser FSH or the TS-EMF System.
  • 9 kHz - 200 (300) MHz
  • Lightweight low attenuation radome
  • Outer diameter ca. 150 mm

MARKETS:

TEST STANDARDS:

Data Sheet

SPECIFICATIONS

 

FSH3D  Handheld magnetic field meter

 

  • Isotropic H-field Antenna
  • Rohde und Schwarz handheld spectrum analyser FSH or the TS-EMF System.
  • 9 kHz - 200 (300) MHz
  • Lightweight low attenuation radome
  • Outer diameter ca. 150 mm

The selection of the active loop and the power supply for the antenna is provided by the included short cable that can directly be connected to the R&S FSH.

 

The FSH3D consists of three identical, shielded loop antennas, which are aligned perpendicularly to each other. A shielded unit follows, containing the switching and amplifier circuitry, which is directly connected to the N-male output and fed by the Binder-connector with power supply and logic signals to select the desired loop-axis. The pin the assignment is ready for operation with the popular handheld spectrum analyzers FSH3/6 and FSH 4/8 from Rohde & Schwarz. An RF-transparent radome cover protects the FSH3D from dust and moisture. Because of its lightweight construction the FSH3D can be directly mounted to the spectrum analyzer. Alternatively the FSH3D can be held manually at its 50 mm shaft (sweeping method) or attached to a mast or tripod using the 22 mm tube (rotation method or raster method). 

 

On-demand, the FSH3D can be delivered with a connector of the ODU-MINISNAP series. The interlock claws allow disconnecting the plug faster.

 

Specifications:  
Frequency Range (nominal): 9 kHz - 200 MHz
Frequency Range (useable): 9 kHz - 300 MHz
Coaxial Connector: N (m)
Power Supply: 5 V DC < 100 mA
Power Supply and LogicConnector: Binder 99-0421-10-07Serie 712
Antenna Factor for fictional E-field strength: 42...70 dB/m
VSWR: typ. < 1.5 (20 kHz - 50 MHz)
Decoupling of the axis: typ. > 20 dB
1 dB Compression at Output: typ. 118 dBµV
Loop Diameter: 112 mm
Dimensions: 550 x 146 x 146 mm
Weight: 850 g
Environmental Conditions: -10°C - +50°C, IP54

 

 

OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...