DAM 4.0-E Dual Antenna Mast

The Dual Antenna Mast DAM 4.0-E 

  • Height range 1.0 - 4.0m 
  • Electric polarization change 90°
  • Electric stepper motor height
  • 20 kg Load capacity (when balanced)

Data Sheet

SPECIFICATIONS

DAM 4.0-E Dual Antenna Mast

The Dual Antenna Mast DAM 4.0-E is  suitable in magnetic  absorption chambers. The antenna mast, with the exception of the drive unit, is fabricated from plastic (PVC and reinforced fiberglass ). Metal parts are located only in the base plate and the drive mechanism (max. 0.3 m above ground level).

Antenna Adapters for all commercially available antennas are available upon request.

All antennas during polarization rotate around their axis to eliminate any elevation errors.

The  LAN (TCP/IP) - interface provides an additional control option for all functions, when operated with the FCU3.0 or NCD Controller.

 

Technical data:  
Antenna height automatic adjustable 1.0 m - 4.0 m
Total mast height 4.6 m

Load capability Non-tilited

max. 20 kg (when balanced)

For long and heavy antennas, a counterweight is required to balance the load.
Depending on the distance of the antenna gravity center
Material of antenna mast Plastic and reinforced fiberglass
Mast cross-section 101 mm x 95 mm
Base L x W 0.95 m x 0.73 m
Position speed adjustable  
   in combination with FCU3.0 1.0 cm/s - 35 cm/s
   in combination with NCD 1.0 cm/s - 20 cm/s
Position accuracy +/- 0.5 cm
  Electric polarization 0° / 90° (vert. I hor.)
  Polarization time approx. 3 s
  Tilt Accuracy +/- 0.5°
Motor DC stepper Motor
Antenna support drive
Material of toothed belts
3 Toothed belts
Kevlar-reinforced (non-metallic)
Voltage 110 VAC - 230 VAC, 50 Hz / 60 Hz single phase
Current consumption max. 16 A
Required RCD 300 mA
Control cable Fiber optic lines
Remote control via LAN (TCP/IP); (IEEE only with NCD)
Interference suppression  20 dB under limits DIN EN 55011:2018-05 class B
Temperature working range  10°C – 35°C
Total weight  approx. 125 kg
Accessories  Service manual
3 m power supply cable
Controller FCU3.0 or NCD Controller

 

Controller Types

  NCD3.0 FCU3.0 FCU3.0S FCU3.0S-LITE
Picture        
# of Devices 8 4 1 1 (one axis)
Display 5.7" touch No No No
HSU3.0 Included
Included 
Included 
Included 
Software mcApp
mcApp
mcApp
mcApp-Lite
Interface IEEE 488.2, LAN,
(option:USB,RS232,..)
LAN LAN  LAN
         

ANTENNA ADAPTER

Antenna Adapters for all commercially available antennas are available upon request. During polarisation, all antennas rotate around their axis to eliminate elevation errors. Please specify what antennas you have.


Mounting Clamping System
Versions Also for HD, Frankonia and Inn-co masts

 



OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...