The controller FCU3.0 S Lite is suited for the operation of one(1) device with one axis of motion. Furthermore, the FCU3.0 S permits the operation in manual, semi-automatic and remote control of one devicey via Ethernet.
Other diameters and load capabilities are available on request.
PARTNER:
MARKETS:
TEST STANDARDS:
FCU 3.0 S Lite ControllerThe controller FCU3.0 – S is suited for the operation of one device with one axis of motion. Usually, the FCU3.0 – S lite is used for turntables, antenna stands, cable guide rails or any other positioning device with one axis. Furthermore, the FCU3.0 – S lite permits the operation in manual, semi-automatic and remote control of one device simultaneously via Ethernet.
Requirements for existing PC • Windows 7 32/64bit or better • .NET Framework (included with mcApp lite software) • 1 GB RAM • 1 GHz Processor • 5.5 GB disk space
Brief description FCU3.0 The FCU3.0 S lite works with EMC software from Rohde & Schwarz, Teseq, NEXIO, Toyo, TDK, Dare!!. LAN (TCP/IP) is used as interface. A software, which allows an automatic measurement procedure, can be programmed by Python, Matlab, C++ and C# easily. Existing devices with a GPIB interface can still be used in parallel to FCU3.0 S lite.
Highlights: - mcApp Installation on an existing PC Software to control all axis of all devices Controller types:
|