The controller FCU3.0 S is suited for the operation of one(1) devices with multiple axis of motion. Those devices can be any combinations of antenna masts, turntables, cable guide rails or any other positioning equipment. Furthermore, the FCU3.0 S permits the operation in manual, semi-automatic and remote control of one devicey via Ethernet.
Other diameters and load capabilities are available on request.
PARTNER:
MARKETS:
TEST STANDARDS:
FCU 3.0 S ControllerThe controller FCU3.0 – S is suited for the operation of one device with multiple axis of motion. Therefore, an arbitrary device, such as an antenna mast, a turntable, a cable guide rail or any other positioning equipment, can be used with the FCU3.0 - S. Furthermore, the FCU3.0 – S permits the operation in manual, semi-automatic and remote control of one device simultaneously via Ethernet.
Requirements for existing PC • Windows 7 32/64bit or better • .NET Framework (included with mcApp software) • 1 GB RAM • 1 GHz Processor • 5.5 GB disk space
Brief description FCU3.0 The FCU3.0 S works with EMC software from Rohde & Schwarz, Teseq, NEXIO, Toyo, TDK, Dare!!. LAN (TCP/IP) is used as interface. A software, which allows an automatic measurement procedure, can be programmed by Python, Matlab, C++ and C# easily. Existing devices with a GPIB interface can still be used in parallel to FCU3.0 S.
Highlights: - mcApp Installation on an existing PC Software to control all axis of all devices Controller types:
|