ASP 1.0/1.8-10 kg Pneumatic Antenna Stand

ASP 1.0/1.8-10 kg Pneumatic Antenna Stand

  • Height range 1.0 - 1.8 m 
  • Pneumatic polarization change 90°
  • Antenna Load: 10 kg (when balanced)

Data Sheet

SPECIFICATIONS

ASP 1.0/1.8-10kg Pneumatic Antenna Stand

The Pneumatic Antenna Stand ASP 1.0/1.8-10 kg is specifically designed for measurements in electromagnetic absorption chambers at a fixed measurement height . The antenna height can be adjusted manually.

The  antenna  stand,  with  the  exception  of  the  rotary  actuator,  is  fabricated  from  plastic  (PVC and reinforced fiberglass).

Polarization  occurs  using  compressed  air.  A  solenoid  valve  located  outside  of  the  chamber regulates the compressed air flow.

Antenna Adapters for all commercially available antennas are available upon request.

All antennas during polarization rotate around their axis to eliminate any elevation errors.

The  LAN (TCP/IP) - interface provides an additional control option for all functions, when operated with the FCU3.0 or NCD Controller.

 

Technical data:  
Antenna height adjustable 1.0 m - 1.8 m
Total mast height 1.9 m
Load capability max. 10kg (when balanced)
For long and heavy antennas, a counterweight is required to balance the load.
Depending on the distance of the antenna gravity center
Material of antenna mast Plastic and reinforced fiberglass
Mast cross-section 60 mm x 60 mm
Base L x W 0.9 m x 0.75 m
  Pneumatic polarization 0° / 90° (vert. I hor.)
  Polarization time approx. 3 s
  Polarization drive Pneumatic rotary actuator
  Control Solenoid valve
  Nominal pressure max. 6 bar
Voltage 110 VAC - 230 VAC, 50 Hz / 60 Hz single phase
Current consumption max. 16 A
Required RCD 300 mA
Control cable Fiber optic lines
Remote control via LAN (TCP/IP); (IEEE only with NCD)
Interference suppression  20 dB under limits DIN EN 55011:2018-05 class B
Temperature working range  10°C – 35°C
Total weight  approx. 30 kg
Accessories  Service manual
3 m power supply cable
15 m pneumatic air hose 8 mm
1 x pneumatic feed through
Controller FCU3.0 or NCD Controller

 

Controller Types

  NCD3.0 FCU3.0 FCU3.0S FCU3.0S-LITE
Picture        
# of Devices 8 4 1 1 (one axis)
Display 5.7" touch No No No
HSU3.0 Included
Included 
Included 
Included 
Software mcApp
mcApp
mcApp
mcApp-Lite
Interface IEEE 488.2, LAN,
(option:USB,RS232,..)
LAN LAN  LAN
         

ANTENNA ADAPTER

Antenna Adapters for all commercially available antennas are available upon request. During polarization, all antennas rotate around their axis to eliminate elevation errors. Please specify what antennas you have.


Mounting Clamping System
Versions Also for HD, Frankonia and Inn-co masts

 



OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...