SG 4.5–10 kg–0.01 Spherical Gantry with TT 6.0–5 t–0.01 Turntable
The high precision positioning system existing of the Spherical Gantry SG 4.5 – 10 kg – 0.01 and the Turntable TT 6.0 – 5 t – 0.01 is suitable in electromagnetic absorption chambers. The structure is made of metal, which can be covered with absorbers.
Antenna adapters for all commercially available antennas are available upon request. The system has a high precision antenna and DUT/EUT positioner with a very high repeatability.
- High-Precision Spherical Gantry and Turntable
- Spherical Conical-Cut system
- High accurate antenna measurement capabilities for both, near-field and far-field data acquisition
- 5G NR FR1 / FR2 OTA testing capabilities
- Positioning accuracy up to 0.01°
- Ideal for Antenna-Under-Test (AUT) e.g. installed in vehicles
- Independent rotations of all motion axis
- Variable speed adjustments at all axis
- Possibility of operation in manual, semi-automatic and simultaneous remote control mode via IEEE 488.2 (GPIB bus) and Ethernet with the controller NCD using fiber optic control
- Readout by high accurate encoders
- Integrated rotary joint for EUT and antennas available upon request
Technical data: |
SG4.5-10kg-0.01 Spherical Gantry
|
Range length |
4500 mm (from pivot point to antenna mounting flange) |
Rotation axis height |
1600 mm – 3000 mm above chamber floor |
Position accuracy |
0.01° at the pivot point |
Load capability |
10 kg |
Rotating angle (rotation axis height: 2000 mm – 3000 mm above chamber floor) |
0° - 95° |
Rotation angle (rotation axis height: 1600 mm – 2000 mm) |
0° - 90° |
Rotating speed |
up to 1.2°/s |
Material of antenna boom |
Aluminum |
Material absorber plate |
Wood |
Motors |
servo motor, frequency inverter
shielded and radio interference suppressed under EN 55011:2018 – 05 class B
|
Controller |
FCU3.0 or NCD Controller |
Technical data: |
TT 6.0-5t-0.0 |
Diameter |
6.0 m |
Load capability
Point Load
|
5000 kg 750kg (at area of 10 cm x 10 cm) |
Height |
1000 mm |
Material cover plate |
Stainless steel |
Rotating speed adjustable |
1.0°/s - 12°/s |
Positioning accuracy |
+/- 0.5° |
Rotating angle |
-200° to 400° |
Motor |
servo motor, frequency inverter |
Turntable drive |
Cam drive |
Elevation tolerance |
< 5 mm |
Square border interface (for easy connection to ground plane) |
6.5 m x 6.5 m, stainless steel |
Controller |
FCU3.0 or NCD Controller
|
Technical data: |
General |
Compressed air |
6 bar |
Voltage |
380 VAC – 480 VAC, 50 Hz / 60 Hz three phases |
Required fuse/breaker |
63 A |
Required RCD |
300 mA |
Discharge current |
30 mA, (higher in the moment when powering on) |
Control cable |
Fiber optic lines |
Remote control via |
LAN (TCP/IP) |
Interference suppression |
20 dB under limits DIN EN 55011:2018-05 class B |
Temperature working range |
5°C – 30°C, the room temperature influences the accuracy of the positioner |
Accessories |
Interface to NCD Controller
1.5 m power supply cable
Service manual
|
Controller |
FCU3.0 or NCD Controller |
Controller Types
|
NCD3.0 |
FCU3.0 |
FCU3.0S |
FCU3.0S-LITE |
Picture |
|
|
|
|
# of Devices |
8 |
4 |
1 |
1 (one axis) |
Display |
5.7" touch |
No |
No |
No |
HSU3.0 |
Included
|
Included
|
Included
|
Included
|
Software |
mcApp
|
mcApp
|
mcApp
|
mcApp-Lite
|
Interface |
IEEE 488.2, LAN, (option:USB,RS232,..) |
LAN |
LAN |
LAN |
|
|
|
|
|
|