CAP 10-100 & CAP 10-200, 10 µF Capacitor for DO-160 and DEF-STAN-59

To be compliant to the standards DEF STAN 59 and DO 160 a 10 μF capacitor like the CAP 10 has to be connected to the mains connectors of the LISN.

MARKETS:

TEST STANDARDS:

SPECIFICATIONS

 

CAP 10-100 & CAP 10-200, 10 μF Capacitor for DO-160 and DEF-STAN-59


To be compliant to the standards DEF STAN 59 and DO 160 a 10 μF capacitor like the CAP 10 has to be connected to the mains connectors of the LISN. 

  • CAP 10-100 used for NNBM 8124 or NNBM 8126 A890
  • CAP 10-200 used for NNBM DO160-1500 or NNBM 8124-200
  • The LISN required calibration with the CAP 10

 

Specifications:  
Capacity: 10 µF ±10%
Dielectric strength: 1000 VDC
Max. voltage at 50/60 Hz 640 VAC
Max. voltage at 400 Hz 600 VAC
Max. voltage at 890 Hz 270 VAC
Max. current: 15 A
Distance wing terminals CAP 10-100: 60 mm
Dimensions CAP 10-100: 120 x 100 x 55 mm
Distance wing terminals CAP 10-200: 90 mm
Dimensions CAP 10-200: 132 x 115 x 55 mm
Ambient temperature: -25° … +60°C
Weight: ca. 230 g
According to standards: DEF STAN 59,DO 160

 

Instructions for use:

The capacitor CAP 10 has to be connected to the mains wing terminals at the rear panel of the LISN. CAP10-100 and CAP10-200 differ in the distance of the connection plates for the wing terminals according to the model of the NNBM series. The allowed maximum values of the LISN as well as of the CAP 10 have to be considered by all means. Due to the high capacitance of the CAP 10 high leakage current to the ground does occur. Thus operation with a residual current operated circuit breaker is not possible.

Note:

The LISN has to be connected to protective earth before connecting any mains to it. Only trained personnel may use this equipment.

 

 

OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...