ONYX 30, 30kV ESD Simulator
Axos 5 - Compact 5kV EFT, Surge, Dips/Drops
Axos 8 - Compact 7kV Surge, Telecom, Ring Wave, 5kV EFT, Dips/Drops
MAG 1000, 120A/m CW, 1100Am Short Duration, Power Frequency Magnetic Field
PEFT 8010 EFT/Burst Test System up to 7.3 kV
PSURGE 30.2 Modular 30 kV / 30 kA Surge Test System
Wood Test Table Kit
FP-COMB 63/690-1, Combined Automatic 3-Phase Coupling / Decoupling Network
FP-COMB 32, Combined Automatic 3-Phase Coupling / Decoupling Network
ESD Test Table Kit
EFTC-CK Calibration kit for burst coupling clamps
Products
ONYX 16, 16kV ESD Simulator
Onyx 16
- +/- 16kV air and Contact Discharge
- 150pF/330Ohm Standard, Other networks available
- >16 hour Battery life, AC mains option
- Optional Software
ONYX 30, 30kV ESD Simulator
Onyx 30
- +/- 30kV air and Contact Discharge
- 150pF/330Ohm Standard, Other networks available
- >16 hour Battery life, AC mains option
- Optional Software
Axos 5 - Compact 5kV EFT, Surge, Dips/Drops
Axos 5 - Compact
- Multi Tester with 16AMP CDN
- EFT/Burst 5kV IEC 61000-4-4
- Surge, Combination Wave 5kV IEC 61000-4-5
- Surge Magnetic field IEC 61000-4-9 (MSURGE-A loop antenna required)
- AC Dips/Drops IEC 61000-4-11 (DIP 116 dips transformer required)
- DC Dips/Drops IEC 61000-4-29 (2x DC supplies required)
Axos 8 - Compact 7kV Surge, Telecom, Ring Wave, 5kV EFT, Dips/Drops
Axos 8 - Compact
- Multi Tester with 16AMP CDN
- EFT/Burst 5kV IEC 61000-4-4
- Surge, Combination Wave 7kV IEC 61000-4-5
- Surge Magnetic field IEC 61000-4-9 (MSURGE-A loop antenna required)
- Ring Wave, 7kV IEC 61000-4-12 & ANSI
- Telicomm Wave, 7kV IEC 61000-4-5 & ITU
- AC Dips/Drops IEC 61000-4-11 (DIP 116 dips transformer required)
- DC Dips/Drops IEC 61000-4-29 (2x DC supplies required)
MAG 1000, 120A/m CW, 1100Am Short Duration, Power Frequency Magnetic Field
MAG 1000
- 1-120A/m Contiunus testing
- 100-1100A/m Short Duration 1-3sec
- Test either 50Hz & 60Hz Selectable
- 1m square Loop
PEFT 8010 EFT/Burst Test System up to 7.3 kV
PEFT 8010
- EFT/Burst
- Up to 7.3kV (6.6kV at CDN)
- CDN: 264V-AC 16-440Hz, 125V-DC
- CDN: 16A-AC @ 50-60Hz, 10A-AC @ 400Hz, 16A-DC
PSURGE 30.2 Modular 30 kV / 30 kA Surge Test System
PSURGE 30.2
- Surge System
- Up to 30 kV impulse voltage
- Up to 30 kA impulse current
Wood Test Table Kit
The Wood Test Table is a simple, inexpensive solution for your EMC testing. The table is built to be ship flattened to reduce shipping costs and easily assembled on site quickly. The picture is shown with a ground plane.
FP-COMB 63/690-1, Combined Automatic 3-Phase Coupling / Decoupling Network
FP-COMB 63/690-1
- Voltage 690V AC & DC
- Current 63 AMPs
- Automatic Switching Surge, EFT, Ringwave
- IEC & ANSI Coupling
FP-COMB 32, Combined Automatic 3-Phase Coupling / Decoupling Network
FP-COMB 32
- Voltage 480V AC & DC
- Current 32 AMPs
- Automatic Switching Surge, EFT, Ringwave
- IEC & ANSI Coupling
ESD Test Table Kit
The ESD Test Table Kit is a simple inexpensive solution for your ESD testing. Complies to the requirements of IEC 61000-4-2 and can be used for additional standards. Comes with a Horizontal Coupling Plane (HCP), resistive cable to tie HCP to floor ground plane, bleeder wire for discharging ungrounded battery powered EUTs, 0.05mm insulator and an alternative low impedance ground for using the table for additional setups such as IEC 61000-4-6 requirements.
EFTC-CK Calibration kit for burst coupling clamps
The EFTC-CK is a calibration kit for burst/EFT coupling clamps as specified in IEC 6100-4-4:2012. It has been designed for calibration of coupling clamps like EFTC2012. The set consists of a transducer plate and a termination bracket (connecting adapter).
