EMScannerR: 150 kHz- 8 GHz, 0.06mm resolution, EMC desktop scanner
EMProbe: 9kHz- 18 GHz, 0.2mm resolution, EMC robotic scanner
EM Near Field Probe Kit w/Camera & Software
RFScanner, Antenna Pattern measurement, 300MHz - 6 GHz
Products
EMScanner: 150 kHz- 8 GHz, 3.5mm Resolution, EMC desktop scanner
- Capability:
- Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, and report generation.
- Spatial scan time:
- Continuous real-time or sub-second single scan for the entire scan area is dependent on spectrum analyzer performance.
- Spectral scan time:
- 45 seconds for L 10 cm x W 10 cm (L 4” x W 4”) PCB with a 100 MHz span and 100 kHz RBW. Scanning area, span, and RBW are user-selectable within spectrum analyzer specifications
- EMViewer Software
- We recommend you use the EMViewer software for best results. A Yearly subscription or a once-off purchase is available.
- Supported operating systems: Windows 10®
- Supported CAD overlays: Standard Gerber© RS274x format and HPGL format
EMScannerR: 150 kHz- 8 GHz, 0.06mm resolution, EMC desktop scanner
- Capability:
-
- Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation, and notes.
- Spatial scan time:
-
- Continuous real-time for the entire scan area (1,218 probes activated) when Level 1 is selected: 5 sec.
- Selected area 2.25 cm x 2.25 cm, 9 probes activated.
- Level 1:
- Spectral scan time:
-
- 11 seconds for L 10 cm x W 10 cm (L 4” x W 4”, 178 probes activated) from 10 MHz span to 110 MHz and 122 kHz RBW. Scanning area, span, and RBW are user-selectable within spectrum analyzer specifications
- Supported operating systems: Windows 10®
- Supported overlays: Picture in JPEG format
- Standard Gerber© RS274x format and HPGL form
EMProbe: 9kHz- 18 GHz, 0.2mm resolution, EMC robotic scanner
- Capability:
- Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation, and notes.
- Customization of the robot arm size, any size, is possible.
- Spatial scan time:
-
- The scan time depends on size and area
- Ideal for large component boards
- The robotic arm allows for advanced scans on complex items
- Supported operating systems: Windows 10®
- Supported overlays: Picture in JPEG format
- Standard Gerber© RS274x format and HPGL form
EM Near Field Probe Kit w/Camera & Software
" A Probe Kit on Steroids"
- Fully integrated with Y.I.C. Technologies EMViewer software and EMProbe
- Normalization and correction when using the EMViewer software
- Flat response within the range of operation
- Slim Design and Protective Coating
- 18GHz Measured Cable included
RFScanner, Antenna Pattern measurement, 300MHz - 6 GHz
- Frequency Range of 300 MHz to 6.0 GHz
- Far-Field Patterns and Bisections, including EIRP / TRP / PRD, Circular and linear polarization, and axial ratio patterns
- Near-field insights such as Amplitude and Phase distribution are available in seconds
- Gain, Efficiency, and S11 chart with Supported VNAs
- “Real-time” real-fast
- Can be used to evaluate either standalone (i.e. passive) antennas or antennas that are embedded in wireless devices (i.e. active antennas).
- Simple set up and Easy to use
